Sponsored
Drayday55's latest activity
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with
Like.
As designed, no. I'm working with it now actually. -
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Just FYI, the rotary knob I used (the one identified in the Thingiverse BoM) does physically rotate from whatever gear you're in to "P"...
-
Drayday55 reacted to Mike G's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Can you imagine the number of Zoom meetings, engineering studies, manufacturing cost estimates, marketing research studies, and test...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Good question. The little step down was a requirement for my particular use to allow for enough depth for the wireless charger to...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Someone was nice enough to leave me a tip on Thingiverse (first ever!) and it inspired me to try another build version out, haha. I...
-
Drayday55 reacted to mr.Magoo's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
How do people slice these things to get 12hr prints ? I'm looking at 3-4 times that.
-
Drayday55 reacted to wzrdmatt's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Completed everything tonight! Took 12 hours to print everything, and only 20min to install! I have a platnium with the large screen. I...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Yep, I cut the tabs for my version and so far there has been no rattle at all. If some were to develop, it would not be hard to pop the...
-
Drayday55 reacted to Maquis's post in the thread Charge Station Pro issues - in the most unlikely way with Like.
It is waterproof. The water has to be coming in either where the conduit enters the unit or through the conduit itself.
-
Drayday55 reacted to K6CCC's post in the thread Home Vehicle Charging with lots of solar panels and net metering question. with Like.
I have had solar with Net metering for about six years so I can answer that part. The truck really has zero impact on that - it's just...
-
Drayday55 reacted to SDSean's post in the thread Home Vehicle Charging with lots of solar panels and net metering question. with Like.
I figured I'd try asking this question here first since it is about my F150 Lighting. When charging my lightning (up to 90%), I'm...
-
Drayday55 reacted to Wendy's post in the thread Ford stopped delivery of Gear Shift Module (GSM) with Like.
If it were me, perfect opportunity to have Ford replace the huge shifter with a rotary one!
-
Drayday55 reacted to TaxmanHog's post in the thread Ford stopped delivery of Gear Shift Module (GSM) with Like.
Could you post snap shots of the two (multiple) work orders showing which parts were changed out, @mr.Magoo alludes to the possibility...
-
Drayday55 reacted to rockfish's post in the thread Ford stopped delivery of Gear Shift Module (GSM) with Like.
I got my rotary shifter delivered a couple of days ago, now waiting on the printed part to show up. I probably will just keep the GSM...
-
Drayday55 reacted to LazyLightningATX's post in the thread Ford stopped delivery of Gear Shift Module (GSM) with Like.
Prob a good few people with one sitting in their garage now after the rotary shifter swap thread. I will be one of them in the next few...
-
Drayday55 reacted to jetfixr1's post in the thread Ford stopped delivery of Gear Shift Module (GSM) with Like.
This is a common problem, I was never a fan of the folding shifter. It sounds like hell and always afraid its going to break. For that...
-
At this point, I think that the 2024 lightning does not have TRON. The first two trucks that tried Comma wouldn't work and we assumed...
-
Drayday55 reacted to h2hrenos's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
I like it might have to do this. Anyone try this with an expedition shifter it has some extra buttons for the non lightning models that...
-
Drayday55 reacted to asianman35's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Yep it's complete, I DM d you
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I just printed a second one with no cover. I made thr hole straight through the bottom so there is no need for magnets. I'll use a set...
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.The fill is rectilinear the top layer is non monotonic
-
Drayday55 reacted to digitaldad's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
I vote textured as there are a lot of patterns going on there already. Someone earlier mentioned possible spillage being next to...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Thank you for the kind words, dude! I'm not master, or even close, but my 3d printing obsession has turned into a 3d modeling...
-
Drayday55 reacted to EliPNW's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
As a visual learner, I would love to see a video on the installation. If you know of one, please share. If not, hopefully, there is a...
-
Drayday55 reacted to jmyer72's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Dropped it off at the dealer 2 days ago for parking sensor false warnings and interior lights that won't turn off. (Has been an issue...
-
Drayday55 reacted to asianman35's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Another tip: If you are going to use the magnets, insert them before you install anything. I tried adding them after all was said and...
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.What do you guys think? Textured or pattern?
-
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
FYI, I just uploaded a "full" TPU mat part. The one that was there before was kind of specific for the gridfinity version, but the new...
-
Drayday55 reacted to asianman35's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Hey all, I just installed the shifter and have a few tips, it took me longer than it should have for sure, but it works and thats what...
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.This thing is looking good in PETG-Carbon I think I'm gonna leave it unpainted
-
-
Drayday55 reacted to wzrdmatt's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
If anyone wants some texture on their 3d print, here is a cool idea for the cap. I did a quick sample print of the cap (just the top)...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
That looks sick! The extrusion lines around the edges almost make it looks stitched too. Very cool.
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Just wanted to let everyone know (especially @asianman35), that I've updated Thingiverse and deleted all the console variants that...
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Ok. Got it. For some reason the last time I opened thingiverse it didn't show this whole list. Thanks!
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.I tried to open the file in the sub folder but my slicer says "no geometry found"
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
Hmm, that's odd. I see it in the Files section (called "Shift_Box_Lid"). It looks like I can't post STLs here, otherwise I'd just send...
-
Drayday55 replied to the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder.Hey guys, i found the file for the main housing as i do not want the gridfinity cubbys. just the clean housing. But i cannot find the...
-
Drayday55 reacted to hturnerfamily's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
in 2018, after SPEEDCO changed the oil in our rear-engine diesel motorhome, we experienced a similar, and yes, perplexing 'coating' or...
-
Drayday55 reacted to ENDianDigital's post in the thread Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder with Like.
By the way, I expanded on the original fB post a little bit to add a couple more photos and a link to a quick video I made today at work...
-
https://pimpmyev.com/products/custom-led-side-mirror-projector-puddle-approach-lights-for-ford-f150-lightning-2022-2023
-
Drayday55 reacted to Howard_Scott_Warshaw's post in the thread 2025 Order banks open through dealers today (2/11/25) with Like.
Spare tire now optional. NACS adapter included 1 year of Blue Cruise No more On Board Scale or tow Tech package Meh. I will still...
-
Drayday55 replied to the thread Turns out there was no First major problem in 67000 miles, Post #23.Good call
-
Drayday55 reacted to NW Ontario Ford Lightning's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
Should edit the thread title - the problem that wasn't !
-
Drayday55 reacted to JPro's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
First MAJOR problem that was actually someone else’s problem 😂
-
Drayday55 reacted to MaintGrl's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
Great news, and that the updates went smoothly, also....I'm sure that is a relief...
-
Drayday55 reacted to ZheWiz's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
I'm also amazed at the quantity of fluid, which is why I pity the poor guy you were following. Bad news for them, great news for you...
-
Drayday55 reacted to ZheWiz's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
They still have your truck? Curious how this all turns out...I need..."the end of the story".
-
Drayday55 replied to the thread Turns out there was no First major problem in 67000 miles, Post #23.Morning guys. Thanks for all the interest. Yes i take the comma out every time. I don't need the drama. But it was in until...
-
Drayday55 reacted to Zprime29's post in the thread Warning chimes suddenly sound different with Like.
Has anyone noticed a change in the way the warning chimes sound? This morning, mine started having a different tone/lower quality sound...
-
Drayday55 reacted to Henry Ford's post in the thread Turns out there was no First major problem in 67000 miles, Post #23 with Like.
I agree with @Ricks Lightning. The transmission fluid in the Lightning is red. The spray pattern suggests the oil was released at high...
