Sponsored
Itaintfastenough's latest activity
-
Itaintfastenough reacted to Henry Ford's post in the thread Please help with my home charger install with
Like.
Talk to an electrician. I don't see anything in that panel that would prevent a 50A charger circuit. I'm assuming you can either add... -
Itaintfastenough replied to the thread Ghost Frunk lighting.Good pointā¦
-
Itaintfastenough replied to the thread Ghost Frunk lighting.I donāt see how, as we were in the house (2nd floor) asleep & about 60ft from the all metal locked up shop where itās parked, and 725ft...
-
Itaintfastenough replied to the thread Ghost Frunk lighting.. š¤£š¤£š¤£
-
HVB contactors engaged to power the DC/DC 12v charging cycle, your LVB must have reached its low limit
-
Looks like the truck woke up. Is it possible a FOB or PaaK was moving in the vicinity of it? It doesn't necessarily need to be close.
-
Was charging my LVB and received a security cam alert from shop after midnight. When reviewing clip, you can see the frunk light turn on...
-
Itaintfastenough replied to the thread Cabin Air Filter That will Satisfy a Wife Nose.I agree with MillieChlietteā¦ The Pure Flow is an awesome cabin air filter. They offer a HEPA & antibacterial filter as well
-
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.Thatās awesome!! I wanted toā¦ I really did, but when I found out how much it costs, I just couldnāt. Went with engineered wood...
-
Itaintfastenough reacted to windydrew's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
I have a similar milwaukee box in the front. I also have my milwaukee hand tool bag.
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.I hear yaā¦They are indeedā¦Theyāve bailed me out several times when I was out of a needed ratingā¦my service van (2020 Transit Connect)...
-
Itaintfastenough reacted to PrimeRisk's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
I own rental properties and there isn't a single matching cap in any one of my 14 A/C units. I have the entire suite of the Turbo Caps...
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.Sharp eye!
-
Itaintfastenough reacted to PrimeRisk's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Very nice! That's a quick afternoon project to keep in mind (other than the drying time on the Herculiner). Oh, and I see that Turbo...
-
Itaintfastenough reacted to Pioneer74's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
Found it. https://www.macheforum.com/site/threads/connecting-trickle-charger.32608/page-2#post-732359
-
Itaintfastenough reacted to TaxmanHog's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
https://www.amazon.com/CTEK-M10-Extention-Connector-Batteries/dp/B0D2M2X6SZ...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Thanks man!
-
Itaintfastenough reacted to Adventureboy's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
There are a few folks who have 3D printed their versions of the larger clips. One of the models is here...
-
Itaintfastenough reacted to bmwhitetx's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
Or put it under the faux charge cover that comes with the 22's and 23's. Thread is here, didn't read if they were successful...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Thats good to know... Thanks!
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Iāve looked for those clips online with no luck.. Have several thatās snapped off. I think the only way to get them is by replacing the...
-
Itaintfastenough reacted to hturnerfamily's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
on another note: I think those 'twist-lock' cover connectors for the left and right side covers are not really needed - I would doubt...
-
Itaintfastenough reacted to TaxmanHog's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
It's your HVB heat exchanger, connected to AC compressor, on MaxTow trucks it's on the drivers side connected to the exclusive secondary...
-
Itaintfastenough reacted to Adventureboy's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
I would say nothing to be concerned about. The truck looks new topside and underside side except for the road grime on the underside...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Nice set up! Questionā¦Iām in central Texas, and salt is seldom usedā¦ are there any signs of salt induced rust/corrosion on your...
-
Itaintfastenough reacted to Adventureboy's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
I took it a step further and installed the charger right on the battery door and routed a cord to a 120v port in the front grill. Here...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Had me there for a minuteā¦Totally forgot about the manual Frunk/Hood release in the cab, so even with a DOA LVB, you can still open the...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.I see your point. Pioneer74 mentioned someone in the MachE forum did one similar but installed it inside the carge port door area. Iāll...
-
Itaintfastenough reacted to TaxmanHog's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
Nice setup, I to would like to find a better solution that's rearward of the Frunk zone, if God forbid my trucks LVB goes T/U I can't...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Thanks, same conceptā¦ the ājumpā would be one way, meaning ātoā the Lightningā¦ our mod would be incapable of providing the amperage...
-
Itaintfastenough reacted to The Weatherman's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
Nice setup. I like it! I did something similar, but it was for a trickle charging setup. I didnāt consider the potential of jump...
-
Itaintfastenough replied to the thread LVB EASY ACCESS JUMP/CHARGE PORT.Well, you just never knowā¦ who knows, perhaps Ford will one day take notice!
-
Itaintfastenough reacted to Pioneer74's post in the thread LVB EASY ACCESS JUMP/CHARGE PORT with Like.
Nice. I wish I could find it, but somebody on the Mach-E site did the same thing but mounted it inside the charging door. I knew I...
-
Itaintfastenough posted the thread LVB EASY ACCESS JUMP/CHARGE PORT in Show & Tell: Photos, Videos, Builds.All though it hasnāt happened yet, if the LVB did Need a jump, or chargeā¦ thereās two options, either empty the Frunk for access to...
-
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.Thatās one keen eye you haveā¦and thereās only a fraction of it visible!
-
Itaintfastenough reacted to Old Aviator's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Any reason you did not just cut the OEM plate and hinge it. Should take less effort since it already fits and only the gap might need...
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.I tried the standard depth ones, but hood was hitting them when closingā¦ When I saw they are going for almost $400 bucksā¦ wood was much...
-
Itaintfastenough reacted to broncoaz's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Height wise I think you could fit the standard depth organizers on top of the drawers in there. Iām looking at doing the same setup...
-
Itaintfastenough reacted to Zprime29's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Brilliant idea, thanks for sharing!
-
Itaintfastenough reacted to Phil D's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Very nice. How did you plug the drain? With the recent rain weāve had in central California, Iāve noticed water coming up through the...
-
Itaintfastenough reacted to 21st Century Truck's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Nice job! Gives me ideas... thanks.
-
Itaintfastenough reacted to stealthchaser's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Great idea. Thanks for sharing.
-
Itaintfastenough reacted to Skidrowe's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
It took me a second to figure out what you did. I love the hinge idea! It can be custom made to fit any specific stationary object.
-
Itaintfastenough reacted to evowner's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Nice idea.
-
Itaintfastenough reacted to Danface's post in the thread Lower Frunk Storage Flip-Up Lid - DIY Solution with Like.
Nice job .. makes we wonder if I should go get www.customfrunk.com as a place to share "frunky" ideas (OK, I should have prefaced it the...
-
Itaintfastenough replied to the thread Lower Frunk Storage Flip-Up Lid - DIY Solution.Didnāt really plug it, but it is covered with a cut to fit soft foam mat, (which is about 1/4ā thick) that serves as sort of a cushion...
-
Itaintfastenough posted the thread Lower Frunk Storage Flip-Up Lid - DIY Solution in General Topics.Got tired of having to remove Milwaukee PackOut Box every time I needed to get something out of lower storage. Removing it wasnāt too...
-
