Recent content by shoopg

This is what my post was about. I've retrofitted the HSW in my Pro myself, full OEM but DIY. I do not have the option in FordPass, but my wheel does automatically come on with remote start when its cold out. Yes, I did this in 2022 lol.

I pretty much went through the spreadsheet and enabled everything related to the HSW. I also swapped to the digital climate controls at the same time. It comes on automatically with cold temperatures and remote start through FordPass, I just don’t have the button available in the climate...

I did mine DIY but I'm curious to see if what you find for these guys would work for my truck as well. I'm 100% OEM, just did it myself.

Hello! I've designed a 3d printable dock for the Ford provided Tesla Supercharging Adapter that fits perfectly into the glovebox to stop it from banging around your cab. :) The model is available here: https://makerworld.com/en/models/604580 The print is designed for PETG. If you try ABS or...

There’s a link in my instructions 🙂

Need Forscan 2.4 beta

You need the Forscan 2.4 beta for module updates.

Looks sharp in white!

So excited for this, May can’t come soon enough!

Mine had 2 volts on pins 6 and 10 (I think those were the pins)

Good to know! I'll add this in the main post. The Ford workshop manual for programming says to make sure the truck is unplugged from the EVSE so it seems like there's a good reason for it. Truck looks great!

Yeah I was very worried I had broken things when it stopped lighting up lol. I should probably try to get the original firmware so people can restore if needed.

If you program it without the light bar plugged in the drls in your headlights will stop working and throw open circuit codes. So far every Pro has had the connector behind the grille. There is some concern that base model pros may not have the wiring all the way to the power source though.

Nope, we just have to cut the fake light bar from the grille. The frunk seals with the rubber gasket that surrounds the opening. I got mine for $300 on eBay. From the dealer they are part number NL3Z13200A usually around $600 new.

Very possible. If someone with a base Pro could hit the pins with a multimeter we'd have a definitive answer. I made a chart with all of the engine harnesses and their options. The suffixes of the harness are in the first column, 2.4kw on board power is power inverter 3, 9.6kw onboard power is...