Search results

Got mine, order FAE:90008236, order placed 2/29/24 Very disappointed it took so long and the communication was so poor.

Just looking for a horn with a little more oomph to it than the standard one. I've seen that post. Its one example, I'm just looking for other examples. Maybe something that does not take up frunk space.

Anybody add an additional horn? Air horn? Direct drive? Electric?

What sorts of things do you keep back there?

At hwy speeds, range seems to drop about 10% without the cab extension and 15% with the cab extension. No noticable decrease with everything folded down.

I had to use a generator with an inverter, a generator without an inverter would cause a fault in the mobile charger.

What kind of fasteners were used to attach the hinge pin plate for the toolbox?

What are the holes on the stake pocket for? What fastener might work best to attach something using the hole? Do some aftermarket devices attach there, bed extender?

The extensions are welded to a piece of steel that fits snugly inside the D ring and there is another piece of steel on other side of the D ring itself, about as big as the D ring. The bolt really just keeps the whole assembly clamped together around the D ring in a sandwich. It cannot pivot...

Problem seems to have disappeared after the Tesla charging OTA update.

Yes, both of those are on

Remote start only seems to work now when there is Bluetooth connectivity. FordPass version 4.33.0. I know it worked in the past over wifi. I know wifi connection working because I can get up to date charge info with no Bluetooth. not sure if it is related to the FordPass version. Anybody else...

I thought about doing it in aluminum but my skills are better with steel and parts are easier to find. I did all of the welding and had all the mild steel powder coated. The purchased parts are from McMasterCarr. Below is a rough list of parts, probably not entirely complete however. stainless...

Powering the renovations at kids Old West Town in the park

sure, I sent you a PM with my phone number.

The clamp to the tow ring is a flange on the top which is approximately the same shape as the outside of the ring itself, a flange on the bottom which protrudes forward several inches and has two holes in it. There is also a spacer in the middle that fits snugly inside the ring. There is a grade...

Made this setup for a front receiver. The winch is mounted on a receiver so can be used front or back. The receiver mounts to an alloy steel flange bolted through the front tow rings.

Thanks for the info, I was actually looking at those two model generators. I also need one that is dual fuel, so this is very helpful. I am curious though, why would you need to adjust the level 2 charger since the generator seems capable of providing full power to it? Does the Ford mobile...

Looking for suggestions about vendors and specifications for a generator I can use to charge the truck. The existing generator I have puts the mobile charger in amber mode whether on 220 or 110 circuit even before connecting the vehicle. Ford customer service was of no help. I am assuming that...

sorry, no web site, PM me and I'll send some more detailed pics.