Search results

Oh yeah is it ever. There are at least two screws that did not need to be installed by ford. You have to take the actuators off too.

I thought both LC2i and i know the kicker will remote on when signal is detected from the input. My hideaway, although straight input from factory sub feed, remotes on without wiring anything more than the +/- 12 wires.

Used the bolt that holds the seat back release bracket, looking back you could probably use the bolt mounts for the factory sub on the floor. The angle its at in the photo is the way it sits, i dont hear it moving around when driving but i would like to attach the brackets to the top at least.

Here are a couple of photos. I haven't bolted the kicker down yet, time was tight. One piece of advice, the kicker positive lead was not long enough to go from behind the SCrew rear seat, down the door jam, through the firewall (used hood releasd grommet) and to the battery, had to add a little...

Very true, just finished it this weekend. There are two holes in the cab you will have to seal once the b and o sub is removed. I used alum flashing, weather striping and alum tape. 200km today and no issues. Ill see if i can get a photo of the sub installed. Only stumbling block i had was i...

Had mine disconnected for 2 months and no dash lights, from what i have read it will throw a code but only when you connect to the truck, not enough for a light.

Hey guys, sorry i dont have better photos. Just installed a week ago. Purchased through AT. You do have to take the bumper off to remove the air dam. I did remove the motors, frees up space. Ill try to get better photos once the weather improves.

From what i have seen, it should fit behind the seat. I too have the under seat storage. I plan on pulling the factory sub to free up space. I rolled the dice, kicker HS10 has pre amp filter and speaker level so im going to try with out loc, if its still not great then ill drop in an loc.

Its sitting on my work bench just waiting for a break in the weather and ill be installing the 10"kicker in the b&o non-unleashed.

Ill let you know once the part comes in, in February.

I had the factory hankook tires removed before i took the keys. Put on KO2s. I had Open Country AT2s on my 17 f150, the KO2s are much better so far in the Canadian Winter. I have heard about once the KO2s wear that they lose a bit, time will tell. 22,000 on them so far and loving them. I'm...

Ordered the Black skid plate that they keep running out of. I was emailing them directly, ultimately i ordered through American Trucks for two reasons. When in stock, first of February it will ship vs waiting for RTR to open up purchase option. Secondly it was a better deal for me to order with...

I wanted some additional lighting for when I back up in the dark. I was very seriously considering the Putco Blade product, although I`m sure its a great product, I didn`t care for all the additional lights, just the reverse. I was considering some of the bolt on aux lights, but had a feeling...

Removed the 6 bolts that hold the part that drops since there have been several people with this issue. RTR (tremor-ish) skid plate on order. I`ve had the drop down part removed now for a couple of months and have not seen much of a difference in the mileage. The Borla Exhaust on order really...

I thought i was losing my mind. My 17 xlt with factory remote start would work here in canada exactly how each of us expect the 21s to work. My 21 lariat, seats are warm, but the max defrost definitely is not running until i get in and turn it on. My 17 didnt have the auto climate control that...

I would love to see a pic from the front end, maybe from the ground.

Looks sharp, i was between this cover and the one i have (Sentry CT). Just wasn't sure about how easy it was to remove and the brackets at the front of the box.

Just put my CT on this week. 15 mins and it was on. Heffer86, no issues closing it. Very easy to lock in place.