Search results

Sorry for not getting back to you on this @rom. Great that you have it working now. As for me all I did was uninstall FDRS, tried to remove all the files, restarted the computer and installed a previous version. I have not since used FDRS so I have not installed the latest version to see if the...

I checked what I could and it all seemed ok, I also checked the voltage and it was a 12.6v when the ignition is on and car off, and at around 13.4v when the car is on. I had the light bar replaced a couple of weeks before the lights started to fail. The light bar did have water, could that have...

Yea, i drive about 80 miles a day every day except Sunday. I checked but we don’t get a fuse specific to the brake lights from what I see in the fuse description in the manual. I read the it is controlled by the BCM module. I’m thinking in only buying one to see if it is really the whole...

Yea, I’m at about 61,000.

When I brake they don't turn on and when I use the blinker the dash arrow flashes quickly and sound faster. This is how I know that sometimes it works and sometimes in does. Also you can see the lights in the side mirrors and I had my wife drive behind me for about 25 miles. I use One Pedal...

Hahaha Corrected And I wrote all of them wrong. Thanks for the catch.

Hi, has anybody had any trouble with their brake lights? Here is my situation, about a month and a half ago o so my right side brake light started having problems, it would sometimes work and other time it didn't. Then about two weeks after that the left brake light started doing the same...

Done! I was able to update. I went ahead and just retuned to original the same section in each of the modules needed for the GlareFree function. After clearing the DTC it didn’t come back and the SCCM update was able to finish! I still have a DTC in the SCCM but have no idea where to check...

I had no luck, today I tried to update the SCCM but failed. The code U2101 came back after the update said resetting the module, then it read the DTCs and there it was. I went back to forscan and checked the GlareFree values and all where OK except the SCCM which changed back from 2844 (value...

Hey @rugedraw and @Jesse-Infotainment you guys are great. I just finished configuring with forscan the IPMA and IPC to enable glare free (those two module I guess went back to the AS-Built), then cleared the DTCs and re-read them and the 2101 DTC in the SCCM module is gone! Thank you very much...

Crossing my fingers that fixes it. Will try it tonight and let you know. Thanks

Ok, I haven't made any changes to the glare free, could the update have changed the values and therefor created the DTC? The glare free lights have been working though. But I will check tonight with forscan and make the necessary changes and see if it solves the problem.

Just caught up with the posts, sorry for not answering. Will try to get the abt file from forscan tomorrow and send it to you. Thanks

Hey Mike G, checking a picture I took in forscan of my SCCM configuration it is the same as your configuration. I also have the 2D values.

Thanks for the response guys. Sorry for being so late responding but I got caught up at work. Again thanks for the info! @rugedraw I sent you a DM with my situation.

@rugedraw, I sent you the VIN. I was thinking that it could be the IPMA module programming and so maybe try the PMI on that module. There are no DTCs in the IPMA but like I said in the OP when I tried to return the IPMA to AS-BUILT using Forscan it gave me a warning that the number of...

I am using a mongoose cable. I did the self-test and it showed the DTCs and then I ran the PMI but it failed. I have not tried the configuration procedure, this would program the module to the AS-BUILT correct? Wouldn’t it be the same as doing it with Forscan?

Hi, here is my problem. On saturday I updated most of the modules using the latest version of FDRS, but I'm having problems with the SCCM module. It has 2 DTC errors that can't be reset and therefore the update fails. As you can see in the pictures one is that it lost communication with the IPMA...

Thanks for the advice (y)

Hi, just wanted to know if someone has gotten the “Error: Page Not found” message when logging into FDRS. The app accepted the key, the I click login, the ford login pages opens but after typing my user and password the message “Error: Page not found - The requested URL was not found on this...