Search results

What I saw on the front passenger side after I cut the pocket out was a black corrugated plastic sheath, roughly 3/8" in diameter. Not sure what's on the inside, but looked like typical protective wiring shroud. It ran across the width of the hole, maybe 3-4" below the top surface. Regretting...

I highly doubt it as there is no interference with the tailgate - but I can't say for sure as I don't have that slick feature :)

The rails don't cause any interference or water ingress issues. The vertical rack "towers" do interfere with the seals on the sides of the cover when opening the cover, but it just takes a little extra force to push the cover segment past the tower (if that makes sense). I think they look a...

Possibly. I got mine through an accessories shop - this is the one (and yeah, the coating has been bombproof so far - I also had my bed sprayed). https://undercoverinfo.com/undercover-armorflex

I have the UnderCover Armor Flex Tri-Fold and would recommend. I have full access to the bed, zero leaking so far in 6 mos of use. Also very secure and supports quite a bit of weight (I can stand on it). I also like the Line-X coating on the top for durability. I paired it with the Adarac Pro...

Hey Greg, Unfortunately, I did not measure, but I believe there is only about 1" of clearance until you hit the wire bundle. However, the bundle is flexible and can be pushed further down. The trick would be if you need the whole stake pocket space - that might interfere with where the wire...

Again, very helpful - thanks for the quick response. As I don't yet have any trim removal tools, any in particular that you would recommend?

Thanks for the work on this! I have an XLT so looking for the all-black switch and it seems I can only find them up through 2020 - do you know if they are the same for 2021? Here's an example of what I'm finding (and I'm thinking it's not the same for 2021 - partly because the buttons are...

I cut mine out this weekend in order to mount an Adarac. Mostly followed this guy’s older video and the dimensions were spot on. I did find it easier/cleaner just to use a utility knife after drilling an acces hole (vs. dremel or jigsaw). Not factory quality, but turned out pretty good (and it’s...