That's what I was thinking. Odd that Ford would ship it out half baked on the 24s without the animations to match the mach e but it wouldn't surprise me. Makes sense for those who have enabled it on 22/23s for it not to be fully functional though as there are probably still additional updates required to the IPC.
OTA 6.8.0 for the IPC includes the animations for lane change. If the ADAS related modules are up to date but you don't have the IPC update, you can still enable the new features and they will work, but you won't see the animations on the IPC.
If you are up to date on OTA software updates and your dealer performed CSP 24B56, then you already have the lane change assist feature hidden in the software of your truck. You next have to use FORScan to unhide the toggles in order to enable the new BlueCruise features. By default, they are off until you physically toggle them on. As of right now, you only have the improved lane centering software that was updated via CSP 24B56.
Hi,If you are up to date on OTA software updates and your dealer performed CSP 24B56, then you already have the lane change assist feature hidden in the software of your truck. You next have to use FORScan to unhide the toggles in order to enable the new BlueCruise features. By default, they are off until you physically toggle them on. As of right now, you only have the improved lane centering software that was updated via CSP 24B56.
Alternatively, you can just wait until Ford send you an OTA update that enables these new features, but many of us got tired of waiting and enabled them ourselves via FORScan.
The changes needed to do this are not posted publicly. Message me the VIN and in your message, lmk if you have enabled auto-hitch or glare free lighting so I can send you the correct changed needed to not affect other things.
What are the steps to disable curve assist with Forscan?
No idea, but if you're going to experiment, make sure you back up the IPMA config. That is one module you don't want to FAAFO with or it will throw all kinds of codes and prevent other features from working.yeah that's the value I was looking at. Any idea what the difference is between FCIACCM Legacy and FCIACCM Preview? I was considering changing it to 1 to just remove the curve control but hadn't gotten around to it.
Got it. Please remove your VIN from the post. Message sent.
I have not tested fully, but maybe this would work also? It says it adjusts speed for speed limit signs and curves. I definitely want the speed limit adjustment turned off.
