Comma AI self driver assistant

[watts/up]

yes, you need to install the radar and activate ACC via forscan.

Got it. Appreciate the response. Looking forward to adding this.

Sponsored

 

[DIEProphezeiung]

Hey, I just want to say thanks for all the hard work on this everyone! I got my Comma3x installed and running the latest staging version of Bluepilot, and I extended my harness to the mirror. I went for my first few drives today, and so far, so good!
I'm printing the 8-degree window mount now and will most likely swap to the sliding version @Ajzride is using for easy, quick removal in the summer.
Looking forward to future updates!

 

[Mike G]

Bluepilot or Sunnypilot? Trying to figure out the differences, and the DL links.

I'm on the Sunnypilot discord but....

 

[Ajzride]

Bluepilot or Sunnypilot? Trying to figure out the differences, and the DL links.

I'm on the Sunnypilot discord but....

bit.ly/bp-stable
bit.ly/bp-staging

bp is just sp with ford specific enhancements.

 

[FLSpartan04]

Hey, I just want to say thanks for all the hard work on this everyone! I got my Comma3x installed and running the latest staging version of Bluepilot, and I extended my harness to the mirror. I went for my first few drives today, and so far, so good!
I'm printing the 8-degree window mount now and will most likely swap to the sliding version @Ajzride is using for easy, quick removal in the summer.
Looking forward to future updates!

I’ve not been following as closely recently. Is there a simpler harness solution yet, or does it still require soldering?

 

[Ajzride]

I’ve not been following as closely recently. Is there a simpler harness solution yet, or does it still require soldering?

there is an extension you can make, only need to crimp, no solder

 

[DIEProphezeiung]

I ended up cutting and soldering in a 12 conductor extension. Didn't want to wait for the pins that are on backorder.

On a side note, I had a longer drive today, about 50 miles, and I noticed about halfway through that I had not connected the OBD2 plug. Thing is the Comma booted up and seemed to work normally without power from the OBD2 port.
When I realized it wasn't plugged in, I plugged it in while I the Comma was actively driving and didn't seem to see any difference.
Are there certain features or services that will not work with no power from the OBD2 port? Seems like it was working as intended without it.

 

[Ajzride]

I ended up cutting and soldering in a 12 conductor extension. Didn't want to wait for the pins that are on backorder.

On a side note, I had a longer drive today, about 50 miles, and I noticed about halfway through that I had not connected the OBD2 plug. Thing is the Comma booted up and seemed to work normally without power from the OBD2 port.
When I realized it wasn't plugged in, I plugged it in while I the Comma was actively driving and didn't seem to see any difference.
Are there certain features or services that will not work with no power from the OBD2 port? Seems like it was working as intended without it.

OBD just keeps device powered between drives. if you don’t mind waiting on it to boot every time you can omit it.

Sponsored