Heated steering wheel with NL3Z-19980-S HVAC controls

[jdmackes]

So I managed to get the heated steering wheel working on my Pro after installing the replacement NL3Z-19980-S HVAC controls (I didn't like the software button route), but now I've lost my heated seats and the heat from my air system. The module is also throwing a dtc error saying that it hasn't been programmed, so I know there is something I'm missing. I loaded all of my original HVAC module values into forscan and changed a line or two, but nothing else seemed obvious to change when referring to livinitup's forscan sheets. I was hoping someone smarter than me might be able to help; I'm assuming that it might be a firmware update, but I'm not sure how to get a hold of the firmware files. If anyone can offer any help or advice, I'd appreciate it!

Sponsored

 

[jdmackes]

I'm convinced that it's a firmware issue, problem is getting a hold of the firmware files for a XLT that would have heated and cooled seats, and a heated steering wheel.

 

[Pioneer74]

I'm convinced that it's a firmware issue, problem is getting a hold of the firmware files for a XLT that would have heated and cooled seats, and a heated steering wheel.

No XLT has cooled seats. Not even ICE.

 

[jdmackes]

No XLT has cooled seats. Not even ICE.

Hmmm, looks like that would be a problem then cause there's no lightning with a lariat or higher trim that would have these controls...

Sponsored