Will 35x12.5 BF Goodrich Ko2 tires fit with 2” level kit?

[LuisCarrillo91]

Can you fit BF Goodrich Ko2 35x12.5 on a 2021 f150 XLT with a 2 inch readylift? I’m trying to see if this will work without modifying anything.

Thank you in advance.

Sponsored

 

[wayne]

me too. i like the K02's they are quiet

 

[LuisCarrillo91]

I should also have added That with these tires I’m looking to match them up with method wheels 18x9 with a 25 offset

 

[Asphaltman]

I don’t think so but you might want to still check. Im running a 295 60 r20 and it’s 33.9 tall x 11.6 and I clear with just a 1/2”. I’m using a 20x9 wheel with a +20 offset. Factory offset is +44

 

[LuisCarrillo91]

I don’t think so but you might want to still check. Im running a 295 60 r20 and it’s 33.9 tall x 11.6 and I clear with just a 1/2”. I’m using a 20x9 wheel with a +20 offset. Factory offset is +44

I wanted to try but the tire shop told me I had to order the tires and had to keep if they don’t fit. So I’m trying to see if anyone else has tried this setup first. Your setup sounds great. I might have to go that route If this doesn’t work.

 

[Asphaltman]

I wanted to try but the tire shop told me I had to order the tires and had to keep if they don’t fit. So I’m trying to see if anyone else has tried this setup first. Your setup sounds great. I might have to go that route If this doesn’t work.

I just went my route because it was the size that ready lift had recommended. I’m pretty happy with how it turned out.

https://www.f150gen14.com/forum/threads/fuel-rebel-6.2704/

https://www.f150gen14.com/forum/threads/rapid-red-f-150-2021-club.209/post-41935

 

[LuisCarrillo91]

Can you fit BF Goodrich Ko2 35x12.5 on a 2021 f150 XLT with a 2 inch lift? Anyone tried it?

 

[Corsini77]

Can you fit BF Goodrich Ko2 35x12.5 on a 2021 f150 XLT with a 2 inch readylift? I’m trying to see if this will work without modifying anything.

Thank you in advance.

I would think not. I have a 6 inch BDS lift with 325/60-20 Ko2’s. Slight modification up front was needed to fit. Rubbed on the bottom air dam up front (plastic piece across the bottom of bumper). The 325/60 is slightly bigger than a 35x12.5 tire, but with only a 2 inch lift, I would guess it would not fit.

 

[LuisCarrillo91]

Thanks. Yeah I’m thinking I might have to go a bit smaller.

I would think not. I have a 6 inch BDS lift with 325/60-20 Ko2’s. Slight modification up front was needed to fit. Rubbed on the bottom air dam up front (plastic piece across the bottom of bumper). The 325/60 is slightly bigger than a 35x12.5 tire, but with only a 2 inch lift, I would guess it would not fit.

 

[eurofan85]

35x12.5 open country a/t III, with a 2” level no crash bar removal.

 

[LuisCarrillo91]

That looks amazing! Exactly what I’m looking for!! Any rubbing at all? Did you have to do any modifications to make it work?

35x12.5 open country a/t III, with a 2” level no crash bar removal.

 

[LTDXLT]

35x12.5 open country a/t III, with a 2” level no crash bar removal.

Is your side emblem all blacked out, and if so, how did you get this look?

 

[9663mu]

35x12.5 open country a/t III, with a 2” level no crash bar removal.

What a breast! Are your wheels 18x9? Also what off set?

 

[eurofan85]

That looks amazing! Exactly what I’m looking for!! Any rubbing at all? Did you have to do any modifications to make it work?

the tiniest bit of rub nothing bad and it’s only when I have the wheel cranked all the way to the left and I’m in reverse but it’s not bad enough to bother me.

 

[eurofan85]

Is your side emblem all blacked out, and if so, how did you get this look?

Haha plasti dip but I already took it off. Waiting for painted ones to be released

Sponsored