Ben21

I'm really glad I met @Jesse-Infotainment . Remotely solved it. Speechless. My hands are too cold to type righ tnow from the cold here. Thanks everyone for the tips and guidance. It's back up and running after trying a lot of things. Last thing was the screen flickering and then it went...

I ended up going with the Amazon Basics sheets. "Less is more" when applying. I probably used about 12x24 inches for each of the driver and passenger doors. For those with the panoramic moonroof, thoughts are it would be a bit different: I think that the panoramic roof has a flexible cover...

Noted! Appreciate the advice. I'll have more to share soon. I read through the comments here about how the breathalyzer could be interrupting the software and the possibility that it'll need to be removed to fix it. I reached out to Jesse and have a lead now and much better understanding of the...

Yes, did a combo of the butyl mats and the thinsulate. Think of the door like a sandwich that has an outer aluminum layer, an inner frame, and the plastic door trim. The inner frame has a big hole in it, covered by a plastic sheet called the vapor barrier which separates the outer frame from...

Yes, it still works. I was told it could lock up on battery death but surprisingly it hasn't had any issues yet. I haven't tried that enough. I will go now and try plugging in the battery, and immediately activating the breathalyzer, and then during the two minute countdown see if it leads to...

That's a good point... Yes, I do select the existing profile and that seems to at least let it connect. Bt like you said, it hangs at PDM. If what you mean by selecting the BCM is seeing it in the config and programming area, then no. Like, when I click on the Config and Programming module...

Ok. I'm guessing purple is something that the VCM shows, right? Here's the pic I had taken after the firmware install failed, in the image here. I retried again right after and it failed at the same place. When I unplugged the battery to try again later, plugging it back in resulted in not...

I appreciate you carefully reading my post. Your info is helpful. It makes sense it would lock out like that. No custom shop mechanics in my area (so far) seem to be comfortable with helping me on this after asking their ford specialist mechanics about it. It sounded like they could help but...

This is a write up on my experiences modifying the insulation on my f150 lightning to improve audio quality and cabin temps. If you're interested in ways to quiet the cabin and reduce heat/cooling losses, read on. I'm curious about any questions or thoughts on this and happy to expand on any...

I see what you mean. I'll make some edits.

I bet it would.

It's injection molded plastic, so the finish is smooth. Pretty sure if someone wanted a similar color match contrast, they could spray can paint it and it would stick to the surface without sanding. I see that there are glossy and some other versions now. The images show the slight raised...

I noticed some new tundras and rams with 3d raised large lettering inserts on the tailgate. I liked that and I found a similar 3d raised lettering to add to my vehicle. (image attached) Note, this isn't like the vinyl sticker. This is matte black unpainted 3d lettering. I'm not sure how it...

I will try rebooting the computer and trying again tonight or tomorrow. I should clarify I'm using a different beta version of forscan than the usual version. It's not usually used and not easy to get, but there's an alternative version of the software with the ability to update and modify the...

Thanks for the info. I actually appreciate that there's hope it can be fixed like your Fusion was! I'll continue trying. Hopefully someone here has a lead.