Search results

Once you login to PTS, just under VIN and to the left there is an option to give access to your connected vehicle. you will put your email address in and select send. the email you receive will have a pin number which you will use to validate in PTS to allow you access. The pin box will appear...

My 3 day subscription to PTS has expired, but make sure you have connected on in your trucks sync system settings. Be sure your using internet explorer, and send your email approval to retrieve your pin code to allow access to your truck from within your PTS active subscription.

Thanks for the update on this. I've been contemplating the VCM3 it is just the high cost of it. @iceman77 checked on my last update for corruption and did not see anything, which is a great thing. Did not want to enage in the next set of updates if it is going to cause any issues as i have an...

I have been using a VCM 2 Clone that I have had with my old 2002 F150 on IDS. Firmware is updated to the latest 1.01.16 from fords download server. It shows in FDRS as a VCM2

I have an XLT 302A package with copilot 360 assist... "No Bluecruise" could these updates for CCM, IPMA and PSCM be erroneous and causing non blue cruise truck updates some of the issues we are seeing during updating? I have not tried them since some on here have been seeing failure. I did my...

Thanks @JEB for the reply, after I updated my IPC, I did not run the configuration tool, should I have or only if I have enco7ntered issues after the update? I have not noticed any problems and it has been about 2 weeks since I updated it via the CANBUS. Thanks again!

@speedracercjr , the asbuilt you restored, is it the asbuilt prior to you performing the module software upgrade? I download from motorcraft website my asbuilt before and after to compare the changes that were done with updated module software. Isn't restoring to the prior asbuilt defeating the...

thanks for the heads up

I was in FDRS today and did not see any updates for IPC, currently ML3T-14C026-BAK (8" Cluster with 5.0 xlt), my Sync software only shows ML3T- , nothing else.

TRM update in FDRS. I performed the update and now my CMDTC is clear. Took about 5 minutes for the complete process.

@JEB, I'll have to re-up my subscription for FDRS and see if there is another IPC update, as I updated to this version about 2 weeks ago. If there is, I'll hold off on the update until the issues with updating are resolved. It took me 6.5 hours over CAN bus to complete the update. That was the...

@JEB, you are correct, as that is for an 8" cluster. I have an XLT 302 High package.

I was able to get the strategy using Forscan lite.

Unfortunately I have an android phone, I do not have IOS anything to install on.

Thank you, I'll check it out and compare the IPC info to what you posted I'll run a few hundred miles and see if the adaptive table reset I performed improves and if not, I'll take to the dealer to perform service

@TJSparky, what app are you using to see the IPC info?

I have a XLT 302 High 5.0L. I updated the IPC a couple of weeks ago and never had an option to do via usb, it updated via CAN bus and took about 6.5 hrs to complete. I did not receive any errors during the install. I have had successful Sync updates including 2.3.0. My updates were done with a...

I have the Samsung S9+ and I am on kernal 4.9.1 version 10. This is my service tab view. My phone is over two years old so I can't get the latest android version without side loading.

This in in TSB 21-2310 concerning the SYNC 4 for updating for other issues. This might be the reason you're getting the error messages. NOTE: The gateway module (GWM) must be at the latest software level before the APIM update can be performed.

I received PowerUp update 1.6 on 11/22...... Now today... FordPass shows I received PowerUp update 1.4 on 11/25.. How am I going backwards in updates. 1.4 shows New Secure alert and pro power OnBoard improvements, Which I do not have on my truck. Is this a glitch in Fords OTA system?