Help!! Will 35x12.50 fit?!

[21_5.0]

So I’ve been going back and forth online with what sizes fit and keep wanting to get 35s. I already have installed a 2.5” level kit in the front. I am ordering 17” wheels but not sure what offset will allow with a 35x12.50x17. Been looking at fuel wheels or method Race wheels with +1 or 0. I’m okay with some minor trimming to clear them, I just want to make sure I don’t rub the upper control arm. Anyone have Feedback would be appreciated!!!

(Had to repost this, posted this in the marketplace on accident)

Sponsored

 

[xXChartmanXx]

I doubt they will fit without major trimming. I had to do some minor felt and plastic and valance trimming to clear 35x12.5R20 Nitto Ridge Grappler on Fuel Maverick 20x9 +1mm offset with a BDS 4" lift.

 

[21_5.0]

I doubt they will fit without major trimming. I had to do some minor felt and plastic and valance trimming to clear 35x12.5R20 Nitto Ridge Grappler on Fuel Maverick 20x9 +1mm offset with a BDS 4" lift.

If I could just be free of having to use the saw to cut the crash bars I’m okay with trimming the fender liner felt and plastics up. Like that front valence aero I’m okay with trimming that up. I have a 2012 SVT Raptor on 37s with fiberglass up front and they still rubbed up front under full lock

 

[xXChartmanXx]

If I could just be free of having to use the saw to cut the crash bars I’m okay with trimming the fender liner felt and plastics up. Like that front valence aero I’m okay with trimming that up. I have a 2012 SVT Raptor on 37s with fiberglass up front and they still rubbed up front under full lock

They rubbed on a 4" lift but only with compression of the shock/strut. On level ground, no rub at full crank. On a 2.5" I just don't know with that offset.

Sponsored