Sponsored

Pairing TPMS Sensors For New Wheels / Tires ?

SpaceWhiteF150

Well-known member
Joined
Sep 18, 2021
Threads
16
Messages
307
Reaction score
57
Location
Montgomery, Texas
Vehicles
2021 F150
Have any of y’all ordered wheels and tires through custom offsets? If so how did you get the new tpms sensors to communicate with your truck?
Sponsored

 

Kanuck

Well-known member
First Name
Don
Joined
Aug 9, 2021
Threads
4
Messages
276
Reaction score
66
Location
Manitoba
Vehicles
2021 Super Cab Carbonized Grey 3.5 EC 302A 6.5 Box
Occupation
Electrician, Retired
Most tire shops or the dealer can teach the truck the new TPMs. They have to be the correct frequency tho.I think it is 315MHZ. I had to replace the TPMs in my winter tires and rims to match the 21 and the tire shop got the truck to read them.
 

pkinneb

Well-known member
First Name
Paul
Joined
Jul 25, 2021
Threads
2
Messages
754
Reaction score
76
Location
Zimmerman MN
Vehicles
2003 & 2018 MX5's, 2021 F150 PB Platinum

Sponsored

NH_Leadfoot

Active member
First Name
Geoff
Joined
Feb 10, 2021
Threads
0
Messages
42
Reaction score
23
Location
NH
Vehicles
2021 F150 XLT 302A
Occupation
.GOV
I bought a winter set of wheels/tires for my truck a few months ago and went through this in last month when I installed them on the truck. I went to my local Ford dealership and had them order 4 OE Motorcraft TPMS sensors based on my VIN. The dealer told me I would have to bring the truck back once I mounted the 2nd set of wheels to be programmed. I bought one of the $15 gray square/green button TPMS tools on eBay that corresponded with the frequency of the TPMS sensors. The learning procedure took less than a minute and was much easier than I thought it would be. Press the Start button once to "turn on" the ignition, then press the hazard light switch 3x. The gauge cluster then showed 'TPMS learning' or something to that effect. You then take the small little gray tool/green button and starting with the left front, hold it next to the valve stem and hold the green button until the truck's horn honked once. Then proceed to right front, right rear, left rear. Then hop in, start the truck and you're good to go.
 

pkinneb

Well-known member
First Name
Paul
Joined
Jul 25, 2021
Threads
2
Messages
754
Reaction score
76
Location
Zimmerman MN
Vehicles
2003 & 2018 MX5's, 2021 F150 PB Platinum
I bought a winter set of wheels/tires for my truck a few months ago and went through this in last month when I installed them on the truck. I went to my local Ford dealership and had them order 4 OE Motorcraft TPMS sensors based on my VIN. The dealer told me I would have to bring the truck back once I mounted the 2nd set of wheels to be programmed. I bought one of the $15 gray square/green button TPMS tools on eBay that corresponded with the frequency of the TPMS sensors. The learning procedure took less than a minute and was much easier than I thought it would be. Press the Start button once to "turn on" the ignition, then press the hazard light switch 3x. The gauge cluster then showed 'TPMS learning' or something to that effect. You then take the small little gray tool/green button and starting with the left front, hold it next to the valve stem and hold the green button until the truck's horn honked once. Then proceed to right front, right rear, left rear. Then hop in, start the truck and you're good to go.
Perfect thanks!! That is what I had found so far as well so nice to know it works. My new wheels and tires are scheduled to arrive 2/10/2022 and will have sensors already installed so I will be picking up one of these! Thanks again.
 

Agashi25

Well-known member
First Name
Arban
Joined
Aug 26, 2020
Threads
5
Messages
481
Reaction score
76
Location
Chicago
Vehicles
2015 Mustang GT PP CO
I bought the ford tpms trainer remote on Amazon for my mustang. It was like $17
 

Dsmenardvt

Member
First Name
Dan
Joined
Nov 18, 2021
Threads
1
Messages
12
Reaction score
3
Location
Vermont
Vehicles
2022 F150 501A SCrew 6'7" Antimatter PB
Occupation
Concrete
2nd on the purchase link?
 

Sponsored

Dsmenardvt

Member
First Name
Dan
Joined
Nov 18, 2021
Threads
1
Messages
12
Reaction score
3
Location
Vermont
Vehicles
2022 F150 501A SCrew 6'7" Antimatter PB
Occupation
Concrete

Dsmenardvt

Member
First Name
Dan
Joined
Nov 18, 2021
Threads
1
Messages
12
Reaction score
3
Location
Vermont
Vehicles
2022 F150 501A SCrew 6'7" Antimatter PB
Occupation
Concrete
What I posted, I’m not sure if it works I was just trying to see if it is the same as what was mentioned above
[/QUOTE

Glad you clarified, I didn't catch the different user.
 

pkinneb

Well-known member
First Name
Paul
Joined
Jul 25, 2021
Threads
2
Messages
754
Reaction score
76
Location
Zimmerman MN
Vehicles
2003 & 2018 MX5's, 2021 F150 PB Platinum
 





Top