Search results

looks like thats going to be my weekend project. Is there any other easier way to access the 15k867B connection without taking off the grill and front bumper?

when you added the CCM, did you have to replace both 12a581A or just a new 15k867b?

got it, keep us posted on the retrofit

Could someone clarify what parts are actually needed to retrofit this on a 302a? The CCM and steering wheel switch only?

do you plan on adding the hvac control to this? It seems that the only control with the heated steering comes with ventilated seat. If that's the case, i guess we would have to retrofit ventilated seats too so we dont have a dead switch

i figured it out. Anyone installing a subwoofer should change the following in forscan 727-01-01 xxxx x*xx xx-- *A after changing the parameter, the overall sound and sub level is awesome

I just installed the Kicker HS10 to a non B&O system. I changed the factory speakers with plug and play aftermarket and sounds a lot better. does anyone know the forscan parameters that should be changed for external sub setup?

could anyone who has successfully completed this do a DIY write up?:)

Jesse helped me with this. You needs changes to ACM and APIM in forscan. When changing ACM data, first copy your factory as built data in ACM and change your data ACM: 727-01-01 X0XX-XXXX-XXXX Leave the rest the same and make that a 0 APIM: 7D0-01-01 XX8X-XXXX-XXXX Leave the rest the same...

That's correct, I used bar stock as you mentioned. The mounts are pretty stable as I had it on the truck for about a year with zero issues. I would still like to see if there's an aftermarket grill to relocate the lights inside. Maybe the aftermarket Raptor grill would work

seems like I don't have that option in mine. Was wondering if anyone knew the codes to enable that feature in Forscan.

i’ve looked everywhere but not seeing the surround sound option in sync4. I had the base sound system but recently replaced the ACM for HD radio. Was wondering if its a forscan change for surround sound

does anyone know if we can enable surround sound in non b&o system in forscan?

I purchased a new HD Radio ACM from ebay for $300. I don't know the exact part number but the picture is below. does anyone know what the third antenna plug and the mini usb plug is for?

I installed the 2020 fox 2.0 and lowered it 1”. Love it and hasnt given me any issues

I just tried doing the same but ran into a problem, I loosened the pinch bolt just a little too much that when I attempted to adjust the perch, it slightly popped off the thread. I ended up compressing the spring and completely taking the pressure off the perch and making my adjustments. I...

awesome! Thanks for the info. I wondered why after the install the front was slightly higher than the back. Gotta do this ASAP.

Have you installed these yet? The reviews on the website have people complaining that the provided u bolts were too short to install

I installed the fox 2.0 and pretty happy with it. I just noticed today, while looking at Roush's website, that they recommend the following: "NOTE: 2021 Trucks will require the lower spring perch to be adjusted 5/8” of an inch down on the strut shaft (towards the lower control arm) for proper...

nope, I basically made my own. FYI, the 2021 grill interior space is now smaller than previous and wont fit light bars. I made my own back brace and mounted light bars on the front of the grill.