Adarac Contour bed rack + Gator HR1 tonneau cover installed on 2021 F-150

[Hambone]

Thought that I would share a few pictures of the Adarac Contour bed rack and Gator HR1 tonneau cover installed. Both of these compliment each other with no interference issues. Tailgates drops just fine and the tonneau seems to be holding out the weather very well so far.

 

[Fishtrap]

Did you install or have it done. Appears your truck is the short box as is mine. If you did the install how was the front pocket cut out process.

 

[Hambone]

Did you install or have it done. Appears your truck is the short box as is mine. If you did the install how was the front pocket cut out process.

I did the install on my own, both the rack and tonneau. You don't need to cut out the front pockets; they are just caps that pop out from the top rail cover. Super easy overall. Probably about 1.5 hours for both.

 

[Fishtrap]

I did the install on my own, both the rack and tonneau. You don't need to cut out the front pockets; they are just caps that pop out from the top rail cover. Super easy overall. Probably about 1.5 hours for both.

 

[Fishtrap]

Not on my truck. The 5.6 bed top covers do not have a cap on the front. It's there on the rear just not the front. I've read where only the shortest bed has this problem. The 6.5 and 8 ft have caps both front and back

 

[Hambone]

Not on my truck. The 5.6 bed top covers do not have a cap on the front. It's there on the rear just not the front. I've read where only the shortest bed has this problem. The 6.5 and 8 ft have caps both front and back

Gotcha. I have the 6.5 bed so it has the caps that pop out both front and rear.

Sponsored