Blind Spot Assist System Fault: Fix post #19

[Gimme_my_MME]

Thanks everyone, i have an appointment at the dealer for this week. Just trying to home remedy the error.

You don't need to go to the dealer. Just disconnect the 12v for a minute, reconnect, and problem solved.

Best case: you avoid having to mess with a dealer

Worst case: does nothing to solve your problem

Sponsored

 

[jobofly79]

You don't need to go to the dealer. Just disconnect the 12v for a minute, reconnect, and problem solved.

Best case: you avoid having to mess with a dealer

Worst case: does nothing to solve your problem

Thanks I actually did try that yesterday but the error still comes up every time i start the truck.

 

[Gimme_my_MME]

Thanks I actually did try that yesterday but the error still comes up every time i start the truck.

Hmm and you deleted the trailer?

 

[jobofly79]

Ok so I just went and unhooked the battery again and let it sit for 5 minutes and now the blind spot error went away. I also plugged my trailer in to the 7 pin connector and now the lights and turn signals work on the camper. Glad i checked again. Thanks for all of the help.

 

[Gimme_my_MME]

Ok so I just went and unhooked the battery again and let it sit for 5 minutes and now the blind spot error went away. I also plugged my trailer in to the 7 pin connector and now the lights and turn signals work on the camper. Glad i checked again. Thanks for all of the help.

Alright! Another dealer visit avoided!!!

 

[NW Ontario Ford Lightning]

Ok so I just went and unhooked the battery again and let it sit for 5 minutes and now the blind spot error went away. I also plugged my trailer in to the 7 pin connector and now the lights and turn signals work on the camper. Glad i checked again. Thanks for all of the help.

Keep an eye on it, and report back if the problem returns ... curious minds need to know !

Sponsored