Search results

I disabled the 30 minute auto vehicle power down timer using FORScan. So with this, just leave the truck running but lock it and you have pet/kid mode. Just have to make a laminated sign and tape it onto the driver & passenger side window if you are scared that someone may smash your windows...

It defaults to OFF, but you still can turn it on if you want.

I disabled the 30 minute auto vehicle power down timer using FORScan. The setting you need to change is: IPC 720-01-01 x*xx xxxx xx Subtract 8 from the value that is in the second position denoted with * In the second position, there will be a letter A to F that represents a certain value...

Can I get a check for 1FTVW1EL3PWG12195? Thanks in advance.

Kids were complaining the second row wasn't cold enough. So I bought a dual head USB fan from Amazon that clips onto the headrests and plug it into the cigarette outlet behind the center console. Now the kids complain that it's too cold. Good thing the fan heads can pivot in any direction.

Thanks! Paint is actually Iconic Silver.

Thank you thank you! I installed the Start X remote start kit today and it works great. Video of it in action.

You can remote start the Lightning with the keyfob by installing the Start X remote start kit for the gas 2021+ F150s. Video link showing it in action.

Here is how I fixed my frunk. The problem is that the instructions written in the owners manual are so bad. To clarify, here are the steps that I would write. Step 1 - Pull the manual release loop once to release the primary latch, while someone is at the front of the truck lifting up on the...

Read this F150forum.com thread: https://www.f150forum.com/f118/water-leak-cowl-seam-474781/?ispreloading=1 It is the same problem that exists on our trucks. Water is making it's way into the cabin via the firewall cowl or the body seams at the top and bottom of the windshields. This is why even...

Read this F150forum.com thread: https://www.f150forum.com/f118/water-leak-cowl-seam-474781/?ispreloading=1 It is the same problem that exists on our trucks. Water is making it's way into the cabin via the firewall cowl or the body seams at the top and bottom of the windshields. This is why even...

If you have the 15" vertical screen, you can suction mount to the back of the screen and orient a phone holder to the top left of the screen. I used the iOttie Easy One Touch 5. https://www.amazon.ca/dp/B0875RKTQF

If you have the 15" vertical screen, you can suction mount to the back of the screen and orient a phone holder to the top left of the screen. I used the iOttie Easy One Touch 5. https://www.amazon.ca/dp/B0875RKTQF

If you have the 15" vertical screen, you can suction mount to the back of the screen and orient a phone holder to the top left of the screen. I used the iOttie Easy One Touch 5. https://www.amazon.ca/dp/B0875RKTQF

Read this F150forum.com thread: https://www.f150forum.com/f118/water-leak-cowl-seam-474781/?ispreloading=1 It is the same problem that exists on our trucks. Water is making it's way into the cabin via the firewall cowl or the body seams at the top and bottom of the windshields. This is why even...

It's currently -40C/F where I am, and I had to pull the emergency release to get my frunk to open. Whatever the case may be, the one pull did not work at all. Had to do it with two people. Even when I took it to the dealership, I had to help out the service manager. He lifted the hood while I...

I assume you're in Edmonton or Calgary. I'm in Edmonton =) Obviously on a cold soaked battery it will affect performance. But not as bad as what you're describing where you can't get it going above 30kph.

Thank you! This fixed my stupid frunk ajar issue earlier tonight. To clarify, here are the steps that I would write. Step 1 - Pull the manual release loop once to release the primary latch, while someone is at the front of the truck lifting up on the frunk. Step 2 - Continue to pull on the...

Refer to this thread on how to tape a magnet on the frunk outlet cover to trigger the frunk outlet reed magnetic switch: https://www.f150lightningforum.com/forum/threads/“front-trunk-outlet-cover-not-closed”-message-work-around…sort-of.16348/

This thread shows what the workaround is, by taping a magnet on the outlet cover to trigger the reed switch. https://www.f150lightningforum.com/forum/threads/%E2%80%9Cfront-trunk-outlet-cover-not-closed%E2%80%9D-message-work-around%E2%80%A6sort-of.16348/