Avocadodude
Well-known member
- First Name
- Kurt
- Joined
- Feb 24, 2022
- Threads
- 12
- Messages
- 674
- Reaction score
- 732
- Location
- Fallbrook, CA
- Vehicles
- F150 Lariat
I had a square with one piece, found the other half stuck inside the bag.
Sponsored
Sponsored
VTRedWingsFan
Well-known member
Oddest think, I can't ship to my house !
" Please note you cannot checkout on this store for Arizona, Oklahoma, or Vermont addresses. If you are in those states, click here for Ford products. "
BennyTheBeaver
Well-known member
Copy and paste the part numbers into Google, it will show you other parts stores that will ship to you.
VTbuckeye
Well-known member
I had mine shipped to the nearest dealer and used my fordpass points. Total out of pocket was under 3 dollars.
VTRedWingsFan
Well-known member
Lazy got me. Didn’t feel like going up to St. Albans. SBurlington was not an option for some reason. Thinking about using points on frunk organizer.
Sponsored
VTbuckeye
Well-known member
I called s Burlington and told them that I wanted to use my points. About a week later they called to say the part was in. Last snow storm I didn't fill the front of the running boards with snow and dirt. A bit of a drag to actually have to go in and pick up, but the price was right.
Where are you located and what color did you end up with?
VTRedWingsFan
Well-known member
Antimatter blue. Live in Essex, work in Williston. You’ll find me on 2A during commute times.
VTbuckeye
Well-known member
I'm in the junction, work in Burlington. Rte 15 is my commute. I work less than a 30 minute walk from the S. Burlington library and free level 2 charging. Once we build up net metering credits (solar installed in August) I will charge more at home. There are a few lightnings that I see around, but probably more R1Ts. I've got one of the atlas blue trucks around.
mdlightningIL
Member
Morning!
Recently put these OEM flaps on and I’m wondering about the steel brackets that clip onto the aluminum body. As I tightened the screws, they twisted and made contact with the panel below. As time goes by, just wondering if these brackets are going to rust and damage the aluminum panel. Also wondering if debris is going to get under the flap where the rubber clips to the lower wheel arch. Hey these are OEM so we are probably good?
And I’m thinking these won’t decrease range, but curious if anyone has thoughts.
Any vibrations post install?
Whew that’s a lot of thinking haha. I’m going to get some more coffee. Y’all enjoy your trucks!
Recently put these OEM flaps on and I’m wondering about the steel brackets that clip onto the aluminum body. As I tightened the screws, they twisted and made contact with the panel below. As time goes by, just wondering if these brackets are going to rust and damage the aluminum panel. Also wondering if debris is going to get under the flap where the rubber clips to the lower wheel arch. Hey these are OEM so we are probably good?
And I’m thinking these won’t decrease range, but curious if anyone has thoughts.
Any vibrations post install?
Whew that’s a lot of thinking haha. I’m going to get some more coffee. Y’all enjoy your trucks!
Sponsored
