Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

[TechnoSwiss]

I designed this version and I'm happy to answer any questions anyone might have!

I was getting ready to pull apart my console so I could CAD something up, thanks for putting the STEP files up on Thingiverse!

Sponsored

 

[ENDianDigital]

I was getting ready to pull apart my console so I could CAD something up, thanks for putting the STEP files up on Thingiverse!

#STEPfileMasterRace, haha. NP, I definitely wanted to make it as easy as possible for people to tinker.

 

[josephalbert0425]

I designed this version and I'm happy to answer any questions anyone might have!

I just want to say thank you, I am sure it wasn't easy but you're an MVP for putting that 3D print file out there.

 

[ENDianDigital]

I just want to say thank you, I am sure it wasn't easy but you're an MVP for putting that 3D print file out there.

You're very welcome! I've benefited from other's generosity in the DIY space, so I was happy to find a place I could contribute.

 

[ENDianDigital]

By the way, I expanded on the original fB post a little bit to add a couple more photos and a link to a quick video I made today at work going through some of the questions I got. Here's a link to that in case anyone might benefit:

 

[GarageMahal]

I designed this version and I'm happy to answer any questions anyone might have!

What build volume dimensions are needed? I am currently shopping for a new printer

 

[TechnoSwiss]

By the way, I expanded on the original fB post a little bit to add a couple more photos and a link to a quick video I made today at work going through some of the questions I got. Here's a link to that in case anyone might benefit:

Gridfinity!!!

 

[ENDianDigital]

What build volume dimensions are needed? I am currently shopping for a new printer

Congrats on printer shopping, that's fun! So, 1) I've heard Bambu is getting ready to release something new , and 2) my volume is 300x300x300 (pretty sure that's right, K1 Max).

 

[ENDianDigital]

Gridfinity!!!

All hail, gridfinity! This was a great (if a little gratuitous) opportunity for me to meld my two recent printing obsessions, haha

 

[ENDianDigital]

I've seen a couple questions about whther or not this could be sliced to print in two pieces. I'm sure it could tbh, but I would worry about nasty seam lines. If I get a chance this weekend, I might play around with it some more to see if a good slicing profile can be found.

 

[TechnoSwiss]

My printer is large enough to print this, so I haven't looked at other options, but you could also check out pcbway.com or jlcpcb.com , they offer 3D printing services and you could get them to 3D print this for you.

edit: okay JLCPCB is over $150 (before shipping), so that's kind of a pricey option.

Sponsored