What the frunk? Lightning front trunk dimensions / measurements and configurations - photos

[Silent_Thunder]

Some of you have been asking for specfics as it relates to the *FRUNK*. I’m attaching some photos with additional measurements (perhaps these are available online?) It appears an item measuring 33”w x 22”d x 13”t would fit with space to spare.

For reference in the pics, I’m using a 27-gallon tote sourced from a local Costco. While I got the frunk to close with it turned perpendicularly, I don’t recommend it.

We’re talking 5/8” max for the dome of the hood.

 

[Revenge]

Damn! My hopes and dreams are shattered. I needed 17" in height for my cooler. https://smile.amazon.com/BODEGA-Ref...a-876b-92bc1fa68368&ref_=pd_gw_ci_mcx_mi&th=1
Guess it will just go in the bed then.

 

[RickLightning]

Some of you have been asking for specfics as it relates to the drunk.

This is pretty outrageous. Discussing personal medical issues in a forum? HIPAA and all that.

Wait, wut? He mean "frunk"?

 

[BzzzzztZapPow]

Thanks for the pics and specs.

 

[Silent_Thunder]

Damn! My hopes and dreams are shattered. I needed 17" in height for my cooler. https://smile.amazon.com/BODEGA-Ref...a-876b-92bc1fa68368&ref_=pd_gw_ci_mcx_mi&th=1
Guess it will just go in the bed then.

Right??! We have the Yeti roller cooler that never made it into our Model 3. I was hoping it’d fit in the trunk, but it’ll have to stay out back…

 

[Silent_Thunder]

This is pretty outrageous. Discussing personal medical issues in a forum? HIPAA and all that.

Wait, wut? He mean "frunk"?

D@mn you autocorrect!!

 

[REDHORSECA]

Damn! My hopes and dreams are shattered. I needed 17" in height for my cooler. https://smile.amazon.com/BODEGA-Ref...a-876b-92bc1fa68368&ref_=pd_gw_ci_mcx_mi&th=1
Guess it will just go in the bed then.

The hood inner panel is domed higher than the side wall.
We’ll need height dimensions from inside with the hood closed. Hint hint

 

[hturnerfamily]

yes, and, after all, there ARE lights in there : )

 

[Revenge]

The hood inner panel is domed higher than the side wall.
We’ll need height dimensions from inside with the hood closed. Hint hint

YES! Can someone please climb in and measure? Test the safety release while you are at it!

 

[Silent_Thunder]

The hood inner panel is domed higher than the side wall.
We’ll need height dimensions from inside with the hood closed. Hint hint

Good point! Now where to find a willing participant…

 

[sotek2345]

Good point! Now where to find a willing participant…

I have a couple kids I would volunteer, but the drive over would be a pain!

 

[Silent_Thunder]

Ok, since y’all asked:

We’re talking 5/8” max for the dome of the hood.

 

[REDHORSECA]

Good point! Now where to find a willing participant…

You could make an aluminum foil pyramid and place it on top of your Tote box and close the hood.

Measure the height of the crushed aluminum object and add it to the height of your Tote. Maybe subtract 0.5- 0.75 for safety margin?

Never mind, you posted the latest pictures with the tape measure of the hood recess. It's stepped in the center, but the cooler would be larger that that area.

 

[Silent_Thunder]

You could make an aluminum foil pyramid and place it on top of your Tote box and close the hood.

Measure the height of the crushed aluminum object and add it to the height of your Tote. Maybe subtract 0.5- 0.75 for safety margin?

I feel like there’s a good subreddit for this…