Automatic updates stopped working

[BSEE SPARKY]

I think my dealer tech is also confused. What makes this bad is the truck is setting outside of dealers shop. Why? because you can't shift it out of park. It can't detect the brake depression, so it won't do anything. In accessories mode you can get to tow mode, but after pressing that in sync, it requires to shift into neutral which you can't do. Ford will need to make a work around on that. Like after tow mode is started, the brake doesn't need to be depressed to put in neutral. Anyway their plan tomorrow is to get some dollies from body shop and try to roll it inside where they get better internet connections.

They did take your note about country code in TCU. Maybe that will help.

Sponsored

 

[rugedraw]

I wish I would have seen you post before you had the truck towed to them, but it is what it is now.

 

[BSEE SPARKY]

I wish I would have seen you post before you had the truck towed to them, but it is what it is now.

True Thanks for help to date. They gave me a 2025 Escape as a loaner, it ain't no lightning. Even with this issue, the lightning is still the best vehicle I have ever seen.

 

[BSEE SPARKY]

Here is an update. I called the dealer this morning. They told me they have gathered up some info and sent it off to ford. It sounds like they are stumped completely. I got the feeling they wouldn't do any more on Lightning until ford gives them something to try. Of course it is still stuck in Park. They did get it on dollies and got it inside.

 

[BSEE SPARKY]

Update: Dealer called me. Ford told them data from ABS module is erroneous. Then said it's time to replace ABS Module. The time to receive ABS Module is 5 days. It would take about a day to replace and checkout. Truck won't be returned until next Wednesday. Assuming the problem is resolved.

 

[3121]

I just spoke to a Ford rep on the phone early this week who told me that the only vehicles getting BC1.4 are Lincoln Navigators. They said that NO Lightnings were getting it anytime soon.

Typical dealer service writer - guessing with TOTAL certainty - Can't use the internet or read service bulletins

 

[BSEE SPARKY]

Pop the little door open under the rubber mat in the shifter area. Stick the key in to unlock the shifter and move to neutral

When I get truck back I will look for this little door of which you speak. The key is the strange key I was given, that did not know what it was for?

 

[3121]

When I get truck back I will look for this little door of which you speak. The key is the strange key I was given, that did not know what it was for?

Use the key that comes out of the fob - press the springy button on the bottom of the fob and pull the key out. That is the valet key to lock the glove box and armrest (you then give the fob bit to the valet and keep the metal key part. The metal key part also works on the drivers door lock in case the 12v battery dies so you can manually pop the hood for a jump or to put the car in neutral like I mentioned for a tow.

 

[BSEE SPARKY]

Use the key that comes out of the fob - press the springy button on the bottom of the fob and pull the key out. That is the valet key to lock the glove box and armrest (you then give the fob bit to the valet and keep the metal key part. The metal key part also works on the drivers door lock in case the 12v battery dies so you can manually pop the hood for a jump or to put the car in neutral like I mentioned for a tow.

Ok, I looked at second fob. I found the key. Thanks

 

[TaxmanHog]

Pop the little door open under the rubber mat in the shifter area. Stick the key in to unlock the shifter and move to neutral

I might be mistaken, but there is no keyable unlock for the shifter on the center console on these shift by wire vehicles.

Are you confusing the passive key fob reader under the cup holder rubber mat?
That's to be used when your key fob battery has died, or to program new keys and create Mykeys?

 

[3121]

I might be mistaken, but there is no keyable unlock for the shifter on the center console on these shift by wire vehicles.

Are you confusing the passive key fob reader under the cup holder rubber mat? That's to be used when your key fob battery has died.

As per usual @TaxmanHog is correct - I thought the little rectangle hole to the right of the bolt was a release like in ICE vehicles.

@BSEE SPARKY Ignore what I said - There is no manual release.

 

[BSEE SPARKY]

As per usual @TaxmanHog is correct - I thought the little rectangle hole to the right of the bolt was a release like in ICE vehicles.

@BSEE SPARKY Ignore what I said - There is no manual release.

Okay

Sponsored