Bluecruise 1.4 officially being sent out to F150 & Lightnings starting today (12/11/24)!

[rugedraw]

Are 2022 included?

Not yet it seems.

Sponsored

 

[Fast87t]

Nah, Ford needs to release a new IPC updates for the 21-23 trucks to get the pretty animations the Mach E has.



I don't thin anyone at Ford pays attention to that. My truck still shows 21G01 pending and I did it myself a little over 3 years ago at this point.

Anyone that got this OTA can turn buttons on by making the following FORScan changes:

7D0-09-05

xxxx xxEx 2x--

7D0-10-02

xxxx xxxx 1x--

Note: This will NOT enable the features themselves. This will ONLY work if you got the 1.4 OTA update.

Hi All,

Can I enable the lane change assist features etc. in Forscan on my 22 Lariat SR Lightning?
My last update was the 6.14.0 and I had dealer due all the other CSP'S.
I'm up to date and have had no OTA'S since 9/26/24.
I have Blue Cruise 1.0 since day one of ownership.
Could I change a few codes and enable the lane assist and centering features of, say, 1.2 Blue Cruise, and would it work?
What are the codes for this, and who can post them for me?
It's apparent I'm not getting 1.4 Blue Cruise anytime soon before my subscription runs out in 2025!

 

[rugedraw]

Hi All,

Can I enable the lane change assist features etc. in Forscan on my 22 Lariat SR Lightning?
My last update was the 6.14.0 and I had dealer due all the other CSP'S.
I'm up to date and have had no OTA'S since 9/26/24.
I have Blue Cruise 1.0 since day one of ownership.
Could I change a few codes and enable the lane assist and centering features of, say, 1.2 Blue Cruise, and would it work?
What are the codes for this, and who can post them for me?
It's apparent I'm not getting 1.4 Blue Cruise anytime soon before my subscription runs out in 2025!

Message me the VIN. I cannot answer this without seeing what software version the ADAS related modules are on.

 

[umbrop]

when I check the software updates screen, it still informs me of 10.1.1. which came NOV 16th. Is there a way to "acknowledge" that update so it can check for newer updates (preferably BC 1.4)?

 

[rugedraw]

when I check the software updates screen, it still informs me of 10.1.1. which came NOV 16th. Is there a way to "acknowledge" that update so it can check for newer updates (preferably BC 1.4)?

No, but that won't prevent any other update from coming in. That message will stay there until another update comes in and replaces that message with the info that pertains to the next one. That is totally normal.

 

[umbrop]

thanks. guess i was just missing the satisfaction of the "Checking for updates" message.

Sponsored