Ipma not loading on forscan

[VTbuckeye]

I was trying to get glare free headlights to work iny truck. The other modules would load and I could change the as built data, but ipma would fail to load.

I made the other changes and the green glare free A shower on the dashboard, glare free was listed in the vehicle settings, but they did not work (low beams or high beams only) no automatic anything.

Any ideas on why the ipma module would not load? Thanks!

Sponsored

 

[VTbuckeye]

Sorry for the multiple posts. I got an error message when initially posting.

 

[TaxmanHog]

Clearing out later posts now.....
Carry on.

 

[bmwhitetx]

Make sure you are on the most recent version of Forscan. Also clear out your profile or tell it that you have a new vehicle when doing the initial connection. I did the glare free update today with no issues.

 

[iiimcm]

+1 on this issue. Went to make some changes in the module and it gives me this error. This was on a regular f150 lariat, not lightning.

Is this a more recent issue with Forscan as I did not have this issue in the past.

 

[B177y]

I was trying to get glare free headlights to work iny truck. The other modules would load and I could change the as built data, but ipma would fail to load.

I made the other changes and the green glare free A shower on the dashboard, glare free was listed in the vehicle settings, but they did not work (low beams or high beams only) no automatic anything.

Any ideas on why the ipma module would not load? Thanks!

Same issue for me. Trying to activate glare free on my 2024 Lightning Pro and the IPMA won't write, I get the same error, "Service procedure has been interrupted".

I sent an email to ForScan support last night with the logs and they acknowledged the receipt of everything this morning. Hopefully they can figure out what's going on.

ForScan ver 2.3.63
vLinker FS USB OBD adapter
Lightning Pro ER Max-tow, 7/2024 build date