Motofab leveling kit still not level

[cpalmer41]

I had a Motofab 2.5” level installed yesterday but its still not sitting level. I dont need it to be perfectly level but the fronts measuring 40ish” and the backs 42ish”. Some people have said its because the FX4 but to me if anything then both front and rear should be higher not just the rear.

Would it be a bad idea to remove the rear block? I havent really saw any 1/2 inch blocks.

Its the 3.5 ecoboost with the trailer tow package, not max tow. Any ideas would be appreciated. New ford owner, coming from Chevrolet.

Sponsored

 

[MitLei]

Mine measures about 40.75" front, 41.75" rear with only the Motofab 1.5" kit in it, I had the 2" in it first and I thought it was too high in the front. Stock it was about 38.75" in the front, the 1.5" kit raised it 2". Mines a Lariat FX4 3.5, just has the tow pkg, not hdpp or max tow.

You want a little bit of rake, or anytime that you put something of significant weight in the bed or when towing, its going to have the Carolina Squat! lol

 

[Moto_775]

I had a Motofab 2.5” level installed yesterday but its still not sitting level. I dont need it to be perfectly level but the fronts measuring 40ish” and the backs 42ish”. Some people have said its because the FX4 but to me if anything then both front and rear should be higher not just the rear.

Would it be a bad idea to remove the rear block? I havent really saw any 1/2 inch blocks.

Its the 3.5 ecoboost with the trailer tow package, not max tow. Any ideas would be appreciated. New ford owner, coming from Chevrolet.

The back does look tall, almost like it isn’t settled…

 

[cpalmer41]

Mine measures about 40.75" front, 41.75" rear with only the Motofab 1.5" kit in it, I had the 2" in it first and I thought it was too high in the front. Stock it was about 38.75" in the front, the 1.5" kit raised it 2". Mines a Lariat FX4 3.5, just has the tow pkg, not hdpp or max tow.

You want a little bit of rake, or anytime that you put something of significant weight in the bed or when towing, its going to have the Carolina Squat! lol

Yours looks good and id be fine with how urs is. Mine measures 40 1/4 on both fronts but 41 3/4 on the driver rear and 42 1/8 on the passenger rear.

 

[cpalmer41]

The back does look tall, almost like it isn’t settled…

Yea idk why its so tall in the rear. With some peoples trucks it looks like theirs is lower. Mines 41 3/4 on the driver rear and 42 1/8 on passenger rear.

 

[Doyouevenboost]

Yours looks good and id be fine with how urs is. Mine measures 40 1/4 on both fronts but 41 3/4 on the driver rear and 42 1/8 on the passenger rear.

I’m thinking the Toyo’s on his truck are the difference maker.

Once you stuff something bigger than the oem hancook trailer tires your stance will be perfect!!

 

[Wright Air]

I had a Motofab 2.5” level installed yesterday but its still not sitting level. I dont need it to be perfectly level but the fronts measuring 40ish” and the backs 42ish”. Some people have said its because the FX4 but to me if anything then both front and rear should be higher not just the rear.

Would it be a bad idea to remove the rear block? I havent really saw any 1/2 inch blocks.

Its the 3.5 ecoboost with the trailer tow package, not max tow. Any ideas would be appreciated. New ford owner, coming from Chevrolet.

I had a Motofab 2.5” level installed yesterday but its still not sitting level. I dont need it to be perfectly level but the fronts measuring 40ish” and the backs 42ish”. Some people have said its because the FX4 but to me if anything then both front and rear should be higher not just the rear.

Would it be a bad idea to remove the rear block? I havent really saw any 1/2 inch blocks.

Its the 3.5 ecoboost with the trailer tow package, not max tow. Any ideas would be appreciated. New ford owner, coming from Chevrolet.

I have the same problem. Did you figure anything out?

Sponsored