Truck shell dimensions?

[Lmcqueen23]

So I’m trying to find a shell that fits my 2023 lightning Lariat and need to make sure these are the correct dimensions. Can anyone confirm these measurements.The measurements pictured are for MM. I can’t get very good measurements because I have a tonneau cover on right now and don’t want to remove it, then re-install again.

Sponsored

 

[RickLightning]

The dimensions of the Lightning bed match the gas F-150 with the same 5.5 foot bed.

 

[Newton]

The ARE canopy for the F-150 fits my Lightning Lariat just fine so I am sure others will as well.

 

[Lmcqueen23]

The dimensions of the Lightning bed match the gas F-150 with the same 5.5 foot bed.

Right I knew that. None of the stuff online breaks it down like this though. I am ordering a custom one from overseas and they want to make sure these are the exact measurements and I wanted to avoid taking off my tonneau cover if possible. But I may have to. Just wanted to see if anyone could confirm this for me before I go to the hassle.

 

[RickLightning]

Right I knew that. None of the stuff online breaks it down like this though. I am ordering a custom one from overseas and they want to make sure these are the exact measurements and I wanted to avoid taking off my tonneau cover if possible. But I may have to. Just wanted to see if anyone could confirm this for me before I go to the hassle.

Ah. I thought you were trying to verify that something fits that's widely sold, so you could buy what the gas truck fits.

 

[Danface]

Divide by 25.4 to get inches

 

[Grumpy2]

I am ordering a custom one from overseas

I am interested in what bed cover you are looking at overseas?

Perhaps it isn't a cover, but a inside the bed item?

 

[ED_C]

So I’m trying to find a shell that fits my 2023 lightning Lariat and need to make sure these are the correct dimensions. Can anyone confirm these measurements.The measurements pictured are for MM. I can’t get very good measurements because I have a tonneau cover on right now and don’t want to remove it, then re-install again.

I just purchased a canopy and liner from a Cap-It store in vancouver. told them it was a lightening, color code. They supplied a canopy and liner with all of the plug cutouts and it fits great and stays dry. cost approx 4500 CAD

 

[Lmcqueen23]

Divide by 25.4 to get inches

lol I know. that wasn’t my question. Thank you though. The overseas supplier sent me this and I have a tonneau cover already on my truck and didn’t want to remove it if I didn’t have to. Just because I can’t get exact measurements with it on. So my question was if anyone could confirm these numbers.

 

[Lmcqueen23]

I have a couple I’m looking at from two different suppliers. I just need to take off my tonneau cover and measure it out.

 

[SpaceEVDriver]

The Upfitter guides are what you're looking for:

https://www.fordpro.com/en-us/upfit/publications/

 

[Scorpio3d]

I have a couple I’m looking at from two different suppliers. I just need to take off my tonneau cover and measure it out.

Those look like they are for the zombie apocalypse!

 

[Lmcqueen23]

The Upfitter guides are what you're looking for:

https://www.fordpro.com/en-us/upfit/publications/

Your the man

 

[Lmcqueen23]

Your the man

*You’re

 

[Lmcqueen23]

*You’re

lol yes

Sponsored