Camera Speed Limit Delete

[uavmx]

Do we know that? Like it's been officially confirmed? All we've seen so far is everyone getting different versions, some people getting no updates, and some people that get updates and still can't use the cameras.

I expect that features others are getting will eventually be had by all....

Sponsored

 

[daemonic3]

Found this on the 4Dtech.com website. It overrides any speed limited functions. (Camera, mirror leds, nav entries, etc) Anyone know if there’s something similar for sync 4?

I went to look to see how it would intercept the CAN bus because on the '21 F150 (not superduty) the CAN bus is wireless. That's why our yaw sensor only has power and ground and is not compatible with the superduty, even though it has a round connector with many pins.

Seems like if the wireless comms can be intercepted that would be a massive security flaw as anyone can f**k with our cars by being nearby. Will be interesting to see if they can do it!

 

[nearly]

I expect that features others are getting will eventually be had by all....

I dunno, this is setting the precedent. It certainly will impact how I view Ford going forward. Have you seen anyone that got the camera while driving from an update and didn't have it initially? So far I've seen people leave the lot with it, but not with an update. May have missed it though.

 

[uavmx]

I dunno, this is setting the precedent. It certainly will impact how I view Ford going forward. Have you seen anyone that got the camera while driving from an update and didn't have it initially? So far I've seen people leave the lot with it, but not with an update. May have missed it though.

It seems related to the blue cruise update, which no one has received OTA. So I'll wait for that.

 

[PungoteagueDave]

I’m installing the Canopener device today in my 2021 KR PB - hoping there’s no impact on Bluecruise, which I pre purchased, but isn’t yet downloaded. Also installing their horn honk eliminator and Bambi mode (keeps flog lights on with high beams) flash updates. Will report back if any issues.

 

[Hmcentire]

I’m installing the Canopener device today in my 2021 KR PB - hoping there’s no impact on Bluecruise, which I pre purchased, but isn’t yet downloaded. Also installing their horn honk eliminator and Bambi mode (keeps flog lights on with high beams) flash updates. Will report back if any issues.

how did the installation go? Working well?

 

[uavmx]

I’m installing the Canopener device today in my 2021 KR PB - hoping there’s no impact on Bluecruise, which I pre purchased, but isn’t yet downloaded. Also installing their horn honk eliminator and Bambi mode (keeps flog lights on with high beams) flash updates. Will report back if any issues.

Why didn't you use forscan for those features? Pretty easy to do

 

[Hmcentire]

Why didn't you use forscan for those features? Pretty easy to do

Is there a forescan option for the speed limit function? If so, could you provide detail?

 

[uavmx]

Is there a forescan option for the speed limit function? If so, could you provide detail?

No, that's the point of this thread (I'm the OP) no one has uncovered it yet

 

[Jcartwr97]

I’m installing the Canopener device today in my 2021 KR PB - hoping there’s no impact on Bluecruise, which I pre purchased, but isn’t yet downloaded. Also installing their horn honk eliminator and Bambi mode (keeps flog lights on with high beams) flash updates. Will report back if any issues.

Any update on the motion unlock module install and operation? Really thinking about ordering, but was hoping to see someone have success with the Sync 4 first.

Sponsored