F150 Lightning FORscan thread

[vandy1981]

Is there a good consolidated guide on FORscan usage for the newbies? For example, what must be obvious questions to someone who knows the app - in the "recipe" listed above, do you actually put "x" in place, or do you put the value your truck currently has? And when you save your settings, is it a full save / restore, or does it save only what was changed? etc.

I'm sure I can go hunting for it, but if someone has a great reference handy I'll take it!

See link in OP: https://www.f150gen14.com/2021/05/27/2021-f-150-forscan-database-spreadsheet/

Sponsored

 

[FlasherZ]

I'll have to go play this weekend. I really like the glare-free headlight and DRL options.

 

[jredondox]

I'll have to go play this weekend. I really like the glare-free headlight and DRL options.

i didnt get it to work for me shows on the menu but headlights dont do sh!t

 

[Avocadodude]

i didnt get it to work for me shows on the menu but headlights dont do sh!t

Will try tonight. Not 100% sure to test to see what it does. I get the concept.

 

[jredondox]

Will try tonight. Not 100% sure to test to see what it does. I get the concept.

well I didn’t see lights move or get shorter

 

[vandy1981]

well I didn’t see lights move or get shorter

The wig wag function (swivel) should still work when you start up the truck.

The glare free won't be apparent unless you're going above a certain speed.

I'll double check that I wrote down the correct settings in the OP.

 

[jredondox]

The wig wag function (swivel) should still work when you start up the truck.

The glare free won't be apparent unless you're going above a certain speed.

I'll double check that I wrote down the correct settings in the OP.

please check is it supposed to be the same as ice trucks?

 

[vandy1981]

please check is it supposed to be the same as ice trucks?

The HCM settings are different. Everything else should be the same.

 

[jredondox]

The HCM settings are different. Everything else should be the same.

thank you! can you just verify the number are good? I will try it tonight again. Did you have to reboot each module?

 

[vandy1981]

thank you! can you just verify the number are good? I will try it tonight again. Did you have to reboot each module?

It sometimes takes a few power cycles and time for the settings to "take."

 

[FlasherZ]

DRL forscan code from ice trucks work guys! I used the flashlight to simulate the sunlight and damn it’s bright!

EDIT: I had problems making glare-free and the light bar work, but figured it out.

You must reset the APIM after you're all finished and wait a couple of minutes, then everything should take!

 

[jredondox]

It sometimes takes a few power cycles and time for the settings to "take."

on the ice trucks they change the ipc settings as well. Is it needed for ours?

 

[vandy1981]

on the ice trucks they change the ipc settings as well. Is it needed for ours?

Oops, I left the IPC settings off of the sticky. I just added them now. @FlasherZ and @jredondox, try the updated settings and let me know if it works.

 

[Pioneer74]

DRL forscan code from ice trucks work guys! I used the flashlight to simulate the sunlight and damn it’s bright!

Are you modifying the brightness for daylight, when it's dark out or both?

 

[jredondox]

Oops, I left the IPC settings off of the sticky. I just added them now. @FlasherZ and @jredondox, try the updated settings and let me know if it works.

Ha! Do we get a new icon or the same auto high beams?

Sponsored