Sponsored
joelb1
Active member
I silenced the backup speaker today. Saw a post on MachE forum on how to do it, but Lightning is a bit different....
It is very simple tho...
The speaker is just behind the front bumper on the pass side frame rail. I took it off and out, but there is no need to do that... The MachE speaker can be disassembled and resistor added inside, but not the lightning (unless u want to solder) So removal/disassembly gets you nowhere....
So, just lay under truck
unplug the speaker and add
A resistor into the harness connector (5watt 4R7 4.7ohm off Amazon).
See pics.
I bent the resistor wires as shown and inserted into end of the wire connector, it fits tight, sealed it with dielectric grease and taped it up. I realize there is a more elegant way to do this, but as an experiment it works great and only takes a couple minutes.
Enjoy the silence!
It is very simple tho...
The speaker is just behind the front bumper on the pass side frame rail. I took it off and out, but there is no need to do that... The MachE speaker can be disassembled and resistor added inside, but not the lightning (unless u want to solder) So removal/disassembly gets you nowhere....
So, just lay under truck
unplug the speaker and add
A resistor into the harness connector (5watt 4R7 4.7ohm off Amazon).
See pics.
I bent the resistor wires as shown and inserted into end of the wire connector, it fits tight, sealed it with dielectric grease and taped it up. I realize there is a more elegant way to do this, but as an experiment it works great and only takes a couple minutes.
Enjoy the silence!
Steve 22 Lightning
Active member
Finally got my grill done but waiting on Ford emblem overlay.
Lightning Rod
Well-known member
- Joined
- Nov 27, 2022
- Threads
- 35
- Messages
- 713
- Reaction score
- 520
- Location
- North Coast
- Vehicles
- 2023 Ford Lightning Lariat ER
- Occupation
- CNC PROGRAMMER/MACHINIST
I silenced the backup speaker today. Saw a post on MachE forum on how to do it, but Lightning is a bit different....
It is very simple tho...
The speaker is just behind the front bumper on the pass side frame rail. I took it off and out, but there is no need to do that... The MachE speaker can be disassembled and resistor added inside, but not the lightning (unless u want to solder) So removal/disassembly gets you nowhere....
So, just lay under truck
unplug the speaker and add
A resistor into the harness connector (5watt 4R7 4.7ohm off Amazon).
See pics.
I bent the resistor wires as shown and inserted into end of the wire connector, it fits tight, sealed it with dielectric grease and taped it up. I realize there is a more elegant way to do this, but as an experiment it works great and only takes a couple minutes.
Enjoy the silence!
Just ordered my resistor.
Thanks for the info.
Sponsored
TexasGardeningGirl
Well-known member
- Joined
- Nov 17, 2022
- Threads
- 3
- Messages
- 48
- Reaction score
- 38
- Location
- Argyle, Texas
- Vehicles
- 2022 XLT
They look great !
Tinkered with the power-up update time frames a couple of times today trying to trigger the Lightning to process 3.5.5, no joy so far.
Instead of taking the Lightning for a drive to top off the LVB, I took advantage of 57º, Blues sky's and lonely country roads to give the Street Glide an early mild winter ride, therapy to me.
Instead of taking the Lightning for a drive to top off the LVB, I took advantage of 57º, Blues sky's and lonely country roads to give the Street Glide an early mild winter ride, therapy to me.
Coolbreeze704
Well-known member
- First Name
- Bruce
- Joined
- May 20, 2021
- Threads
- 9
- Messages
- 275
- Reaction score
- 372
- Location
- Troutman NC
- Vehicles
- 2023 F150L ER Lariat - 2022 Tesla Model Y LR
- Occupation
- General Manager - Factory Select Homes
Not sure if we all approve taking time away from answering all our anxiety filled questions that most likely been answered 100 times already and is just a search prompt away.Tinkered with the power-up update time frames a couple of times today trying to trigger the Lightning to process 3.5.5, no joy so far.
Instead of taking the Lightning for a drive to top off the LVB, I took advantage of 57º, Blues sky's and lonely country roads to give the Street Glide an early mild winter ride, therapy to me.
No sarcasm font choice available.
Hope you had a great ride.
By the way I have old Rockport Mass heritage. Family settled in Dedham Mass in 1636. I am a direct descendant of John Guild. Still have a family home in Rockport dating back to 1850. Love Cape Ann.
TexasGardeningGirl
Well-known member
- Joined
- Nov 17, 2022
- Threads
- 3
- Messages
- 48
- Reaction score
- 38
- Location
- Argyle, Texas
- Vehicles
- 2022 XLT
wow looks great!Finally got my grill done but waiting on Ford emblem overlay.
CRAIGC540
Well-known member
- First Name
- Craig
- Joined
- Dec 9, 2021
- Threads
- 21
- Messages
- 801
- Reaction score
- 671
- Location
- Moreno valley
- Vehicles
- F150 Lariot F150 Lariat lightning
- Occupation
- Technician
I like this look, 
and I hate red cars..
and I hate red cars..
Sponsored
Steve 22 Lightning
Active member
I took it into my dealer body shop and the cost was $442.00
Last edited by a moderator:
TexasGardeningGirl
Well-known member
- Joined
- Nov 17, 2022
- Threads
- 3
- Messages
- 48
- Reaction score
- 38
- Location
- Argyle, Texas
- Vehicles
- 2022 XLT
Wheel locks
3D printed cord holder
Reindeer lol
for anyone who has taken recent deliver you might want to check your Lugnuts . Almost all of mine were really lose barely tight
3D printed cord holder
Reindeer lol
for anyone who has taken recent deliver you might want to check your Lugnuts . Almost all of mine were really lose barely tight
Last edited:
swngdncr
Well-known member
- First Name
- Carla
- Joined
- Oct 16, 2021
- Threads
- 12
- Messages
- 107
- Reaction score
- 79
- Location
- California
- Vehicles
- 2016 Toyota Forerunner, 2016 Subaru Outback
- Occupation
- retired mostly
Finished the decals. I had got the 3d carbon fibre ones off of Etsy for the tailgate, but they didn't have them in carbon fibre for the fender/charge port door. So I had to make my own, not 3d, but they are carbon fibre... also photo of seat covers... and the annual trek to the mountains for the holiday tree... trek started out fine... but turned into a rainy, muddy mess, and our favorite tree farm was closed! Oh and a photo of the seat covers I did a few weeks back. Haven't tried with AC, but the heat penetrates through them no problem...
