Fox 2.0 and halo blocks installed

[flynavy]

Had regular fox 2.0 installed along with halo 2.25 rear blocks. I wanted factory rake and it appears I have around 2.5 now versus 3.0 ish stock.

Paid 470.00 for front install with adjustment, alignment check (said no adjustment were needed) and to have rear blocks replaced.

 

[flynavy]

Blocks. Halo makes a nice product, on the expensive side (180.00) but does include new U bolts for the 21 changes.

 

[jcaspar]

How is the ride?

 

[flynavy]

How is the ride?

Rides great. I love how it firmed up and handles my crappy roads better.

 

[mattchops]

Sounds like you got a decent deal on these. Do you mind sharing where you got them?

 

[flynavy]

Sounds like you got a decent deal on these. Do you mind sharing where you got them?

Fox shocks from stage 3 and blocks direct from halo lifts with a military discount code

 

[mattchops]

Fox shocks from stage 3 and blocks direct from halo lifts with a military discount code

It’s weird their site doesn’t list them as 2021. Did you purchase year 15 to 20?

 

[flynavy]

It’s weird their site doesn’t list them as 2021. Did you purchase year 15 to 20?

Yes, there is a whole discussion on that very thing. Roush branded their Ford specific fox kit for 21 but fox didn’t give their blessing. Knowing the roush and normal are almost the same the adjustment should carry over. Couldn’t help myself patience wise so went for it. If a 21 specific kit comes out that seems it will benefit a swap I might consider it.

 

[mattchops]

Yes, there is a whole discussion on that very thing. Roush branded their Ford specific fox kit for 21 but fox didn’t give their blessing. Knowing the roush and normal are almost the same the adjustment should carry over. Couldn’t help myself patience wise so went for it. If a 21 specific kit comes out that seems it will benefit a swap I might consider it.

Appreciate the explanation. I hope you don’t mind if I ask one more question.

Could you purchase these and only set them to raise 1” instead of the 2” or is the 2 only what they can be used at?

 

[flynavy]

Appreciate the explanation. I hope you don’t mind if I ask one more question.

Could you purchase these and only set them to raise 1” instead of the 2” or is the 2 only what they can be used at?

No worries ask away! The problem with that is everyone seems to get different results. Since engines and configurations change everything slightly.

II adjusted it down 5/8 an inch from how it arrived and got roughly 2 inches up front. So if you adjust the pre load even further down you’ll get less lift as you want. I just don’t know how to get one inch exact. And while some have adjusted when it’s installed it’s kind of sketchy since the threads could slip with all that spring tension.

Sponsored