2023 Lightning Lariat updated to Blue Cruise 1.4 at the dealership at no charge.

[PJnc284]

"soon"

Sponsored

 

[shrike0064]

Yeah, the WAL is enabled with the BCM update. There are no further configuration steps unless you want the toggles in Sync (the APIM module).

But I don't know if you get BlueCruise 1.4 just because the IPMA is updated. Besides updating the module, there are configuration changes that have to be made to the IPMA to enable Assisted Lane Change, In-Lane Repositioning, Curve Control, etc. Just updating the module does not do that. Separately, if you want the on/off toggles the APIM/Sync needs a configuration change.

Did you try the blinker test?

Tried the blinker test. No joy. So I'll get with the service manager in the morning and see what's up. I may just have to wait like everyone else if this cannot be solved.

 

[PJnc284]

Tried the blinker test. No joy. So I'll get with the service manager in the morning and see what's up. I may just have to wait like everyone else if this cannot be solved.

You'll most likely have to use FORScan to enable the features or wait until 1.4 is pushed OTA.

Sponsored