Ford Charge Station Pro Unboxing and Install Guide

[LightningLover]

Twice now I have heard @tommolog state that Ford has increased the torque setting on the Ford Charge Station Pro. I received my FCSP in July 2022 and every copy of the installation I can find online, including from Ford's website, has the same torque settings as my instructions:

A/L1, B/N 60 in-lbs
Earth 35 in-lbs
DC+, DC- 35 in-lbs
RS-485 Terminals 3 in-lbs

Are there different torque instructions out there somewhere?

https://content.fordpro.com/content...ord-Charge-Station-Pro-Installation-Guide.pdf

Sponsored

 

[TaxmanHog]

guide

 

[mattis]

I have received my Ford Charge Station Pro and I snapped some photos of it being unboxed and I created a .pdf of the install guide that came with it. I plan on doing the install tomorrow and will share how that goes when it's completed. The install guide came with a separate cover that supercedes the cover that is on the guide itself. You can see it explained in all caps on the bottom of the cover. I only included the corrected cover. The original cover that is on the guide has a sticker that contains the Charge Station ID, MAC address and Access Code to the charger so it will obviously be different for each charger. I included all the documentation that is in the box. Enjoy!

Edited to add a photo of the charger mount plate that was under all that foam packing.

The AC charging is done via CCS1 connector?

 

[bmwhitetx]

The AC charging is done via CCS1 connector?

CCS1 is a combo connector: AC and DCFC.
On the FCSP, the DC pins are reserved for use with the Home Integration System / Whole Home Backup System.

 

[MrCoolDu4]

I installed the Pro charger and it's working well. The only issue I have is connecting it to the app.

 

[TaxmanHog]

I installed the Pro charger and it's working well. The only issue I have is connecting it to the app.

Wait a few days, out of the blue you might find that it has integrated and you'll be able to see the FCSP status, settings and charging history.

Sponsored