Added OEM lighted running board to PRO via factory pigtail forward of the rear wheels and need to activate light in Forscan

[asianman35]

https://a.co/d/3U97VMX

I used these. They fit but are not weather proof so I used some silicone where the wire exits the plug. I cut the red connectors off and spliced, sealed and shrink tubed them. oh and gooped on di-electric grease in the plug

Could you post some pics of what the lights look like at night?? seems like an easy mod, and maybe some pics of the wiring and where the lights are mounted, etc Thanks!

 

[EVMainer]

Could you post some pics of what the lights look like at night?? seems like an easy mod, and maybe some pics of the wiring and where the lights are mounted, etc Thanks!

Thanks for helping us out, I've ordered the wiring and picked up some LEDs from harbor freight. Looking forward to making my running boards I installed on my PRO that much fancier!

 

[jimfigler]

Could you post some pics of what the lights look like at night?? seems like an easy mod, and maybe some pics of the wiring and where the lights are mounted, etc Thanks!

sure

 

[jimfigler]

Could you post some pics of what the lights look like at night?? seems like an easy mod, and maybe some pics of the wiring and where the lights are mounted, etc Thanks!

not a great pic. I’ll take more later.

 

[asianman35]

not a great pic. I’ll take more later.

Thanks for the pic, I get the idea.

I think I'm gonna go with this light strip, It might be overkill, we'll see

https://www.amazon.com/dp/B0BCJVYFMS

will just connect the white lights, not the amber.

 

[BennyTheBeaver]

Thanks for the pic, I get the idea.

I think I'm gonna go with this light strip, It might be overkill, we'll see

https://www.amazon.com/dp/B0BCJVYFMS

will just connect the white lights, not the amber.

Just throwing this out there: https://a.co/d/eHBSzzR
(Doesn't have to be this exact one, but this gives you the point)

Even if you don't use the RGB functionality, you gain the ability to control brightness.

 

[jimfigler]

Thanks for the pic, I get the idea.

I think I'm gonna go with this light strip, It might be overkill, we'll see

https://www.amazon.com/dp/B0BCJVYFMS

will just connect the white lights, not the amber.

I have those too that was my original idea.

 

[asianman35]

I have those too that was my original idea.

did you ever install them? or just change your mind?

 

[jimfigler]

did you ever install them? or just change your mind?

Changed my mind, plus it was winter and I wanted to wait until warmer weather. I may still install them.

 

[asianman35]

Changed my mind, plus it was winter and I wanted to wait until warmer weather. I may still install them.

I installed them today, I really like them. Here's a video of them , they look a little much on the video but are a little more subdued in person

 

[jimfigler]

I installed them today, I really like them. Here's a video of them , they look a little much on the video but are a little more subdued in person

Nice I like those.

 

[Ford Senior Master]

I installed them today, I really like them. Here's a video of them , they look a little much on the video but are a little more subdued in person

How noticeable are the strips?

 

[asianman35]

How noticeable are the strips?

Like the actual strips? You can't see them at all, I put them back behind the bottom weather stripping that's under the door. Like this guy

 

[jimfigler]

I installed them today, I really like them. Here's a video of them , they look a little much on the video but are a little more subdued in person

Did you use just the adhesive strip or did you some extra silicone adhesive?

 

[asianman35]

Did you use just the adhesive strip or did you some extra silicone adhesive?

I used some extra silicone, this stuff, a couple drops on each end and in the middle. Didn't trust just the adhesive.

Loctite 908570 2.7 oz Tub Clear Silicone Waterproof Sealant, Single Tube https://a.co/d/iDFHx0Z

Sponsored