Bluecruise 1.4 officially being sent out to F150 & Lightnings starting today (12/11/24)!

[Texas Dan]

I was looking for a way see if BC 1.4 was installed on my truck and found this picture; it looks BC 1.4 adds the In Lane Repositioning and the Lane Change Assist options. My settings menu still doesn’t have these options.

Sponsored

 

[Mike G]

I was looking for a way see if BC 1.4 was installed on my truck and found this picture;

it looks BC 1.4 adds the In Lane Repositioning and the Lane Change Assist options. My settings menu still doesn’t have these options.

For some reason...I don't know why...they sent an OTA out that updated the IPMA/PSCM with the necessary software to provide the BC 1.4 functionality, but have yet to send an APIM update out that adds those toggles you see in that picture. Maybe the APIM update will show up next week or the week after.

It is likely that whoever took that picture used FORSCAN to add the toggles to the menu. I have done that myself.

 

[Matfus11]

For some reason...I don't know why...they sent an OTA out that updated the IPMA/PSCM with the necessary software to provide the BC 1.4 functionality, but have yet to send an APIM update out that adds those toggles you see in that picture. Maybe the APIM update will show up next week or the week after.

It is likely that whoever took that picture used FORSCAN to add the toggles to the menu. I have done that myself.

I just leased a 2024 Flash at the end of November. I haven't had any OTA software updates as of today and haven't done anything to modify my truck, but I have both of those settings (In-Lane Repositioning and Lane Change Assist). Does that mean mine came with BC 1.4? I wish there was a easier way to tell...

 

[PJnc284]

24s came with 1.2 which has the main features of lane change assist and in-lane repositioning.

 

[Matfus11]

24s came with 1.2 which has the main features of lane change assist and in-lane repositioning.

Gotcha! Thank you

 

[rugedraw]

Do you have the lane change animation..or just a text announcement when it happens?

Nah, Ford needs to release a new IPC updates for the 21-23 trucks to get the pretty animations the Mach E has.

The CSP FSA (24B56) will still likely be attached to your VIN (as it is right now) and will stay that way until your dealer service advisor clears it, or months and months from now somebody runs a script on the server and figures out that your truck was updated by an OTA or a tech, or by you with your personal FDRS subscription.

I don't thin anyone at Ford pays attention to that. My truck still shows 21G01 pending and I did it myself a little over 3 years ago at this point.

I was looking for a way see if BC 1.4 was installed on my truck and found this picture; it looks BC 1.4 adds the In Lane Repositioning and the Lane Change Assist options. My settings menu still doesn’t have these options.

Anyone that got this OTA can turn buttons on by making the following FORScan changes:

7D0-09-05

xxxx xxEx 2x--

7D0-10-02

xxxx xxxx 1x--

Note: This will NOT enable the features themselves. This will ONLY work if you got the 1.4 OTA update.

Sponsored