Bluecruise 1.4 officially being sent out to F150 & Lightnings starting today (12/11/24)!

[SmoothJ]

My 2022 ICE just received this update yesterday (ipma-24.204.10.9). Meanwhile my 2023 lightning is still on power up 6.X SMH (last update was on jan 2nd for 23-pu0110-rad-ps). Lightning gets drove 5-6days a week and the ice is lucky if it gets drove twice in a month lol

I drive my F150L at minimum 3 times a week due to work. So I am surprised I didn’t get any update yet. Plus I am in EA, so I figured I would get it quicker.

I am at 10.1.1 at the moment and I didn’t get the CSP done.

Sponsored

 

[KSkel]

22 lightning Plat. Truck was downloading something on the 9th. No update yet

 

[Willebrew]

I’ve had the infamous Not Completed message for a few days… hopefully it’ll sort itself out

 

[Puffoluffagus]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

 

[Pioneer74]

I’ve had the infamous Not Completed message for a few days… hopefully it’ll sort itself out

Mine has been downloading for 2 days. Hasn't given up yet, but I suspect it will.

 

[lipnorth]

Still no 1.4 luv

 

[rugedraw]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

If the dealer updated the modules, it does not activate the new BC. You would still have to wait for the OTA to come in or you can enable it yourself with FORScan if the necessary updates were done.

Mine has been downloading for 2 days. Hasn't given up yet, but I suspect it will.

Unfortunately, "not complete" means the OTA failed for some reason, so you would have to wait for it to be resent. The trigger is no longer active.

 

[bananaslug79]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

I don't know if the sensors CSP is *required* for the BC 1.4 update, but you will notice a difference in stock BC regardless. I know that when I had the CSP done, there were many highways that Sparky did a LOT better in hands-free mode than when I had the truck from purchase (probably BC 1.1 or some such, not sure). It was worth the camera headaches to have this upgraded.

Sponsored