DIY: Installing ACC (Adaptive Cruise Control) and LKA (Lane Keep Alert) to 2022 F-150 Lightning XLT

[grantmethepower]

Has anyone gone ahead and attempted this like the ICE models by adding everything to a base model Pro without the tow tech pack yet? Still on my wish list just not confident enough to be the first.

Sponsored

 

[mikedroof]

Has anyone tried this on 2023 XLT Lightning?

 

[ZSC100]

Has anyone tried this on 2023 XLT Lightning?

If you have the 4 CCM wires from the IMPA to the passenger kick panel it's a very tried and true mod.

 

[theblunden]

Has anyone tried this on 2023 XLT Lightning?

I installed this mod on my 23' XLT and it works great

 

[mikedroof]

Hey there. I’m coming up short. I can’t get the CCM to show up after changing codes in FORscan. Any ideas?

 

[ZSC100]

Hey there. I’m coming up short. I can’t get the CCM to show up after changing codes in FORscan. Any ideas?

Have you personally traced and even Ohm'd out all 4 CCM wires all the way to the IMPA? When I was doing this I made a long lead and had my brother physically probe each pin of the CCM connector while I did the connector at the IMPA through the dash side access standing at the drivers door with the IMPA connector unplugged.

 

[mikedroof]

Have you personally traced and even Ohm'd out all 4 CCM wires all the way to the IMPA? When I was doing this I made a long lead and had my brother physically probe each pin of the CCM connector while I did the connector at the IMPA through the dash side access standing at the drivers door with the IMPA connector unplugged.

That’s the plan this weekend and go from there. I appreciate everyone’s help.

 

[mikedroof]

Have you personally traced and even Ohm'd out all 4 CCM wires all the way to the IMPA? When I was doing this I made a long lead and had my brother physically probe each pin of the CCM connector while I did the connector at the IMPA through the dash side access standing at the drivers door with the IMPA connector unplugged.

That’s the plan this weekend and go from there. I appreciate everyone’s help.

 

[alexose]

Hey there. I’m coming up short. I can’t get the CCM to show up after changing codes in FORscan. Any ideas?

Several people (including myself) have had to force a write to the IPMA module before CCM would show up. Check out this post before you spend too much time taking your bumper apart

 

[mikedroof]

Several people (including myself) have had to force a write to the IPMA module before CCM would show up. Check out this post before you spend too much time taking your bumper apart

Thank you. I remember that post and tried to force it several times with no luck.

 

[mikedroof]

Got the wires ran. Checked that the CCM module was receiving power. All back together but darn thing still doesn’t recognize the CCM. Even after IPMA changes.

 

[hringrose]

Did anyone have issues with the proximity sensors not alerting after this install? No errors but I don’t get the colors and beeps to let me know I am getting too close.

 

[ZSC100]

You'll only get it from the driver's handle.

 

[hringrose]

You'll only get it from the driver's handle.

Sorry i meant parking sensors

 

[hringrose]

So I was able to fix this by dropping my tailgate, going in reverse, and setting off the rear parking sensors. Once I went into drive, the front ones worked. Weird but hopefully useful knowledge in case anyone else experiences this.

Sponsored