Ford Perimeter Plus Security System

[MJFlanigan]

There are 3 separate harness to unclip from the console. One for lights, one for rear sliding window switch and one for the motion sensor.

Didn't get any pictures of the motion harness, but here is a photo of the blue boxes where the harness plugs into. The "dummy" blue box (bottom in photo) did not have any pins in its connector.

This is helpful. I'm trying to find the harness part number or anything for the whole piece if it doesn't have the power or wires since I have a xlt ER lightning.

 

[mattskr]

My part came in today. Probably a stupid question but does it matter which motion sensor goes where?

 

[SFsparkie]

My part came in today. Probably a stupid question but does it matter which motion sensor goes where?

I went with the pictures provided by previous posts. Using their wire colors to the sensor locations

 

[digitaldad]

Just did mine today too, thanks all for the info! I had the blank blue box as well, so just followed the pictures here and the gen14 thread.

Tested just now and that horn is loud.

 

[MountainAlive]

Oh man just discovering this whole thread today for the first time. I definitely want to add this to my 2023 Lariat.

Sponsored