Jack stand blocks for Powerbuilt 3 Ton all in one Bottle jack and Jack stand.

[Dzsink]

Hi, I have designed a Jack stand adaptor for Powerbuilt 3 Ton all in one Bottle jack and Jack stand.
I am not trying to sell my design. If anyone is interested I can provide STEP file for your own use. Everyone is using this for your own risk. DM me so I can share files.

Sponsored

 

[RickLightning]

Adapter to do what? Why is an adapter needed for a Lightning?

 

[Dzsink]

There is no separate jackstand and lift point. You only can lift and place a jack stand at the same location.

 

[Al_V]

Can you post a photo of your design?
Perhaps a screenshot from your cad program?

 

[RickLightning]

There is no separate jackstand and lift point. You only can lift and place a jack stand at the same location.

I guess you explaining what it is you designed, and showing a picture of it, might help.

 

[fvineyard]

I am interested in more information and a photo as well. Thanks for being willing to share your efforts.

 

[Jake24]

Adapter to do what? Why is an adapter needed for a Lightning?

There is no separate jackstand and lift point. You only can lift and place a jack stand at the same location.

Ample space on the front & rear frame rails to lift with a floor jack & place jack stands.

 

[Tony Burgh]

I have a 30 year old Craftsman combination lift and jack stand. Unfortunately, it’s only rated for 2 tons. But the Jack is integral with the lift and ratchets up as you raise the vehicle. A release on the lift handle locks the jack stand in place under the vehicle. Repeat for all 4 corners.
I would love to find one rated for my truck.

 

[Dzsink]

I have a 30 year old Craftsman combination lift and jack stand. Unfortunately, it’s only rated for 2 tons. But the Jack is integral with the lift and ratchets up as you raise the vehicle. A release on the lift handle locks the jack stand in place under the vehicle. Repeat for all 4 corners.
I would love to find one rated for my truck.

I got four of these.
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound All-in-One Car Lift, Heavy Duty Vehicle Unijack, 640912 https://a.co/d/5Xgu0BS

 

[Dzsink]

I guess you explaining what it is you designed, and showing a picture of it, might help.

 

[Dzsink]

Please find enclosed the images as pdfs. I have used 6061AL.

 

[Dzsink]

There are unique pads for each corner because of the frame, attached one example.

 

[RickLightning]

I don't get it, sorry.

 

[Jake24]

I don't get it, sorry.

likewise

 

[Dzsink]

likewise

The top of the jack stand/jack would sit on top if the jack and the pin would locate on the truck frame. This way it can be endured that the jack will not slip off from the lifting point.

Sponsored