Not able to save Target charging locations after update

[astrand1]

Hoping someone from the Ford BEV Team might see this. I have a 23 lightning Lariat ER. VIN# 1FTVW1EV4PWG30349 I have a yearly subscription to FDRS and I normally do my updates that way. Just a few days ago I did a decent amount of updating and it did a few of the different battery/charging modules. After those were complete I noticed all of my saved “target charging” locations were cleared. I am now not able to save any charging locations. Whenever I try to save either on the app or in the truck it states that I need to first charge at a location and then I can save it. I’m at home charging and have charged at least 6-7 times and no joy. Can’t save anything. If someone from the team or anyone else has thoughts please let me know. Thanks!

Sponsored

 

[Adventureboy]

If you are sure the updating is done, you may want to try a 12V reset. A full truck reboot should restart the modules in the correct order and clear the communication paths between them.

 

[astrand1]

If you are sure the updating is done, you may want to try a 12V reset. A full truck reboot should restart the modules in the correct order and clear the communication paths between them.

That’s not a bad idea. The updates show completed. So I’ll try that tonight and see if it works and report back.

 

[tubby]

That’s not a bad idea. The updates show completed. So I’ll try that tonight and see if it works and report back.

I had something like that a few weeks ago on the Ford app. It wouldn't save my target charge at home. I believe I shut my phone all the way off and turned it back on. I did play with several settings so that may not be the resolve for you since I tried so many things. I always charge it to 80% after I use the truck and then when I know I am going to need more, I charge it to 100%. I may be missing something and it does say you can change the charge level while you are charging, but when the truck is at 80% along with the target at 80%, you cannot plug it in and move the target to 100%. I just move it to 100% before I plug it in. Sorry if that got a bit off topic.

Sponsored