! Not Completed (OTA updates)

[jakes_02]

My last 2 updates have not completed and it has not given me the option to try again like other updates that failed.

@Ford Motor Company

what can be done to get these updates installed?

 

[jakes_02]

normally if it #fails I can try again from this screen.

 

[rsurber310]

I have a 2022 and am not sure if I'm getting updates. Does anyone have the capability of checking my VIN? If so I'd be very appreciative. 1FTFW1E86NKDxxxxx

 

[TaxmanHog]

It's possible your low voltage battery isn't up to snuff, try idling the truck with HVAC fan on level 5 for an hour or so, remember to shut off lights, set parking brake and turn off 30 minute auto shutdown.

This will force a charge on the 12v battery, after that's done try running the current update once again.

 

[PJnc284]

Mine got hung up after downloading 6.14 due to some random unable to disconnect odb error that @rugedraw found in PTS. Might ping him your VIN to see what error it shows. After 3 weeks of no retries, I gave up and went the FDRS route.

 

[rugedraw]

Interrupted by another process is usually low 12v battery related. Message me the VIN and I'll check why it's failing.

 

[rugedraw]

That update failed back in October. Nothing you can do about it now. However, the BC 1.4 update is sitting in your queue for 4 days now, but it is not downloading the files for some reason. If you have FORScan, try rebooting the GWM and TCU. If you do not, unplug the negative cable off your 12v battery and wait 20 minutes before reconnecting to force reset the modules. Then start the truck and check for updates to see if it'll download the files.

The charge on your battery was reported at 60% earlier today. That's way too low for the OTA to ne successful once the files download. If you have a battery charger, charge up your 12v battery.

 

[jakes_02]

I charged up to 90% last night so that shouldn't be it anymore. I purchased forscan recently but haven't used it yet. So I am going to go try this out.

 

[rugedraw]

I charged up to 90% last night so that shouldn't be it anymore. I purchased forscan recently but haven't used it yet. So I am going to go try this out.

Not the battery you drive on....the battery in your frunk.

Sponsored