• Welcome to F150Lightningforum.com everyone!

    If you're joining us from F150gen14.com, then you may already have an account here!

    If you were registered on F150gen14.com as of April 16, 2022 or earlier, then you can simply login here with the same username and password!

Sponsored

Pro Charger at 80A on 125A panel?

OP
OP

KndrTH

Well-known member
Joined
Jun 16, 2022
Threads
2
Messages
50
Reaction score
35
Location
California
Vehicles
F-150 Lightning Lariat ER
The VA ratings they used for appliances is way too big. A typical dryer would be 5000VA, a disposal and dishwasher 1200 each. The refrigerator isn’t normally specified separately. It looks like they simply took the breaker sizes and used that as the load. What a mess.
Yeah, I wish I could speak with the engineer directly. I want to understand his reasoning.
Sponsored

 

Drayday55

Well-known member
First Name
Andre
Joined
Jun 9, 2022
Threads
17
Messages
405
Reaction score
325
Location
San Diego
Vehicles
22 Lariat Lightning
Occupation
Contractor
Sorry man. You need a panel upgrade. Don't go with sunrun. They are grossly overpriced
 
OP
OP

KndrTH

Well-known member
Joined
Jun 16, 2022
Threads
2
Messages
50
Reaction score
35
Location
California
Vehicles
F-150 Lightning Lariat ER
Sorry man. You need a panel upgrade. Don't go with sunrun. They are grossly overpriced
Agreed. For the straight install, $1600 is way too much. It’s roughly $250 worth of material and should be a 2-3 hours of work only.
 

Drayday55

Well-known member
First Name
Andre
Joined
Jun 9, 2022
Threads
17
Messages
405
Reaction score
325
Location
San Diego
Vehicles
22 Lariat Lightning
Occupation
Contractor
That's not right either. Panel upgrades usually cost 2500 to 3500. If you need to trench to upsize the feeder then add another few thousand dollars if you have to demo any hardscape.


Agreed. For the straight install, $1600 is way too much. It’s roughly $250 worth of material and should be a 2-3 hours of work only.
 

Sponsored
OP
OP

KndrTH

Well-known member
Joined
Jun 16, 2022
Threads
2
Messages
50
Reaction score
35
Location
California
Vehicles
F-150 Lightning Lariat ER
That's not right either. Panel upgrades usually cost 2500 to 3500. If you need to trench to upsize the feeder then add another few thousand dollars if you have to demo any hardscape.
Should clarify. I meant for the install without the panel upgrade they will charge $1600. If I had some complex install or the panel was really far from where I would charge, might be worth it. Panel upgrade would be insane as I would need them to trench and replace the service line/conduit.
 

ryan

Well-known member
First Name
Ryan
Joined
May 20, 2021
Threads
9
Messages
67
Reaction score
50
Location
Midwest
Vehicles
sedan
The math checks out if you shut off the house breaker while you charge the truck.
This is the load calc they did
A3FBB26C-C48C-4C0F-8265-46D34E7F0036.jpeg
Does this panel not provide HVAC? Because it looks like that calculated 108.83 amp load excludes HVAC.
 
OP
OP

KndrTH

Well-known member
Joined
Jun 16, 2022
Threads
2
Messages
50
Reaction score
35
Location
California
Vehicles
F-150 Lightning Lariat ER
The math checks out if you shut off the house breaker while you charge the truck.


Does this panel not provide HVAC? Because it looks like that calculated 108.83 amp load excludes HVAC.
Right? Who needs the light on at night? Lol

I have central heating only and a portable AC unit.
 

IWIRE

Member
First Name
Nick
Joined
Feb 17, 2024
Threads
1
Messages
14
Reaction score
2
Location
Texas
Vehicles
2023 F-150 Lightning Lariat
Occupation
Electrical Consultant
This is the load calc they did
A3FBB26C-C48C-4C0F-8265-46D34E7F0036.jpeg
Hard to do actual calculation, as one pictured above says you have multiple of some appliances but doesn’t say how many. Even saying that, the values look suspicious Dryer should be 5000 unless gas?
Sponsored

 
 





Top