pyromaster114
Member
- Joined
- May 14, 2024
- Threads
- 2
- Messages
- 14
- Reaction score
- 6
- Location
- Alabama, USA
- Vehicles
- 2023 F150 Lightning Lariat
- Thread starter
- #1
Title basically says it all. Couldn't charge at Tesla station with adapter.
I'll try a regular DCFC later at the local Ford Dealership for diagnostic purposes and update... But I am not having high hopes... I assume the truck won't fast charge at all, like my last one. (This is the second one... Looks like Ford is cruising for another buyback. -_-)
I tried both activation with plug and charge, and then subsequently tried activation with the app (FordPass) first before plugging in.
I also got a power train fault notification from the App, and the little wrench icon on the dashboard persisted until the following start/stop cycle of the truck.
EDIT: Solution / Explanation Found!
After everyone was saying, "make sure the cord doesn't come out of the adapter", I tugged a little harder than I had before, and it slid right off-- no pushing the button on top like the instructions said I had to.
Tried a few more times, same result.
Got a piece of cloth, braced the CCS1 side of the adapter on the side of the tire with the cloth (so it wouldn't get all gross) between it and the tire, and shoved with both hands. There was a loud, very audible *CLICK* and then the adapter did not come off with the previously increased amount of pulling force, unless I held down the button on the top of the adapter.
I managed to (after disabling Plug & Charge, though not sure if this actually did anything at all...) activate the charger in the Tesla App via the pedestal ID and location, and I successfully charged the truck!
And then I promptly dropped the adapter while removing it from the NACS connector on the cord, which seems to have chipped some plastic on the edge (not the connector, but still), so now I have to get another adapter, since I'm not sure how much I can trust this one now to keep working. T_T
TL;DR:
Man, people are not joking that you have to really shove these things in there. Like, WOW. That was a lot of force. Also, people are not joking when they say "careful, these are fragile".
Manufacturers:
Can we please somehow not have them be fragile? It's something that inherently has to be 'man-handled', and it's also fragile. This is a usability issue from the typical end-user standpoint.
I'll try a regular DCFC later at the local Ford Dealership for diagnostic purposes and update... But I am not having high hopes... I assume the truck won't fast charge at all, like my last one. (This is the second one... Looks like Ford is cruising for another buyback. -_-)
I tried both activation with plug and charge, and then subsequently tried activation with the app (FordPass) first before plugging in.
I also got a power train fault notification from the App, and the little wrench icon on the dashboard persisted until the following start/stop cycle of the truck.
EDIT: Solution / Explanation Found!
After everyone was saying, "make sure the cord doesn't come out of the adapter", I tugged a little harder than I had before, and it slid right off-- no pushing the button on top like the instructions said I had to.
Tried a few more times, same result.
Got a piece of cloth, braced the CCS1 side of the adapter on the side of the tire with the cloth (so it wouldn't get all gross) between it and the tire, and shoved with both hands. There was a loud, very audible *CLICK* and then the adapter did not come off with the previously increased amount of pulling force, unless I held down the button on the top of the adapter.
I managed to (after disabling Plug & Charge, though not sure if this actually did anything at all...) activate the charger in the Tesla App via the pedestal ID and location, and I successfully charged the truck!
And then I promptly dropped the adapter while removing it from the NACS connector on the cord, which seems to have chipped some plastic on the edge (not the connector, but still), so now I have to get another adapter, since I'm not sure how much I can trust this one now to keep working. T_T
TL;DR:
Man, people are not joking that you have to really shove these things in there. Like, WOW. That was a lot of force. Also, people are not joking when they say "careful, these are fragile".
Manufacturers:
Can we please somehow not have them be fragile? It's something that inherently has to be 'man-handled', and it's also fragile. This is a usability issue from the typical end-user standpoint.
Sponsored
Last edited: