I activated the rock crawl front and rear camera views with forscan awhile back. They add an additional soft key that looks like a wheel / tire to the other available views. It just results in a blue screen when selected. Best I can tell these views are for the Bronco and display the front or rear tires. Our cameras seem to be incompatible.
Do you remember what you changed to get front and rear full screen cameras to work during rock crawl?
The ”Bronco“ rock crawl tire view that do not work (no image just a blue screen) was:
I’m pretty sure you will also get no image. The F150‘s cameras appear to be incompatible with this view, but I honestly did not spend a significant amount of time trying to figure it out.
I’m wondering how I can get the same for mine. Because in Rock crawl I don’t get those options
If you are up for a little experimentation:
Thank you for this!!If you are up for a little experimentation:
Blue is a random 21 Platinum FX4
Green is my 21 Tremor 402A
I think the secret sauce is probably within these lines. I would recommend you bounce your trucks values off of mine (green) and the spreadsheet.
Tow mirrors lose the puddle lamp when Lincoln fold is activated too. No known workaround. I like Lincoln fold but I needed puddle lights more so switched back to Ford fold.
That message is completely normal. I see it after making changes in Forscan. It goes away and doesn't return until I make changes again.2021 F-150 XLT 302A
Anyone getting a message on the Sync 4 screen after unplugging the ODB adapter that reads,
"Vehicle location, Driving Data (e.g. usage info) and/or Vehicle Data (e.g. diagnostics) sharing active. See Settings to adjust."
It comes on about 8-10 seconds after starting the truck. It goes away on its own.
This message came on after FORScan did not load all the modules properly the first time I used it. I closed FORScan and unplugged the adapter. I have not made any changes to the truck.
