ECU module programming guide using FDRS

[JEB]

bluecruise is cool I guess, but that is truly the best feature. we're about to go on a cross country trip pulling the airstream, and being able to see the hitch and the trailer is so nice.

I’d be curious to hear how your camera view works for you. I also tow an Airstream. I experienced a glitch with the switch from bed to hitch view and back again where the head unit went completely black. It wouldn’t clear until I stopped. I’m hoping it was a one-time error.

Sponsored

 

[Snakebitten]

^^^^
I played with it today and went back and forth a few times and didn't experience a glitch.
I will purposely try to get it to glitch later and report back

 

[christophers]

I’d be curious to hear how your camera view works for you. I also tow an Airstream. I experienced a glitch with the switch from bed to hitch view and back again where the head unit went completely black. It wouldn’t clear until I stopped. I’m hoping it was a one-time error.

here's the best, glitch-free way to do it (from my 17 hours of experience since i got the feature... haha):

the card on the right side is good for bed camera, the camera button camera is good for the hitch view. i figure, the hitch view is what i want to see up close, and the overall view just makes sure the trailer is still there

 

[JEB]

here's the best, glitch-free way to do it (from my 17 hours of experience since i got the feature... haha):

the card on the right side is good for bed camera, the camera button camera is good for the hitch view. i figure, the hitch view is what i want to see up close, and the overall view just makes sure the trailer is still there

I got the glitch doing it exactly this way, and it took me only 35 minutes to get there.

 

[christophers]

I got the glitch doing it exactly this way, and it took me only 35 minutes to get there.

oh wow, i have to go pick up the airstream later today, i'll try it out on the way home and see if i glitch out.

 

[jtake]

Man, stuck on 21281 with the IPC dtc and non-working running boards. I have not received a new update since Saturday. Glad to hear others have gotten their trucks updated however!

 

[JEB]

oh wow, i have to go pick up the airstream later today, i'll try it out on the way home and see if i glitch out.

As I said, I’m hoping it was just a one-time thing. But if you can replicate it, that would be useful information.

 

[nicholsbradley]

What's the current APIM update? Finally got Gateway and all ccm modules to pass and now I only show an IPC update. But I am just checking on the computer its not hooked up to my truck. SYNC saying 212B rev 244

 

[jtake]

I think you are where I am -- 21281 rev 244..

There is 22028 rev 358 and then a minor one at 22034 people have posted.

What's the current APIM update? Finally got Gateway and all ccm modules to pass and now I only show an IPC update. But I am just checking on the computer its not hooked up to my truck. SYNC saying 212B rev 244

 

[nicholsbradley]

I think you are where I am -- 21281 rev 244..

There is 22028 rev 358 and then a minor one at 22034 people have posted.

I guess they will pop up soon hopefully. Not sure why other trucks not getting them

 

[RellIk&5]

bluecruise is cool I guess, but that is truly the best feature. we're about to go on a cross country trip pulling the airstream, and being able to see the hitch and the trailer is so nice.

I did a bunch of updates last week and still don't have the option to enable the rear camera in motion. Never got a GWM or APIM update....not sure why. But I did have a TCU and IPMA update along with the TMS and both doors.

 

[TJSparky]

I guess they will pop up soon hopefully. Not sure why other trucks not getting them

It also could be model dependent as well. My truck isn’t blue cruise equipped and so far I only have the 21281 rev244 available. The blue cruise 360 camera trucks might have more APIM versions available compared to others.

 

[nicholsbradley]

It also could be model dependent as well. My truck isn’t blue cruise equipped and so far I only have the 21281 rev244 available. The blue cruise 360 camera trucks might have more APIM versions available compared to others.

mine is a platinum with all those options

 

[nicholsbradley]

I did a bunch of updates last week and still don't have the option to enable the rear camera in motion. Never got a GWM or APIM update....not sure why. But I did have a TCU and IPMA update along with the TMS and both doors.

did you get BC from updates?

 

[rpeterslll]

I guess they will pop up soon hopefully. Not sure why other trucks not getting them

Try clicking the little refresh button on the right of the Run button for the FDRS download. This refreshed my APIM software to install after I clicked it and allowed me to install the latest available update to the truck.

Sponsored