ECU module programming guide using FDRS

[iceman77]

Same thing has happened to me. The CCM failed when trying to erase the blocks.

What VCI device have you used ? VCX Nano or Mongoose-Plus ?

Sponsored

 

[abd79]

I’m getting similar stuff this is my IPMA. So I need to fix this?

I have the same 3 marked as “Other” with the same values as you do. I used a Mongoose to update my modules so not sure what these mean or if they’re corrupted. I’ve tried multiple network scans and ope/close FDRS with no change.

 

[Bob_Mac]

What VCI device have you used ? VCX Nano or Mongoose-Plus ?

He has the VCX Nano...

 

[iceman77]

I have the same 3 marked as “Other” with the same values as you do. I used a Mongoose to update my modules so not sure what these mean or if they’re corrupted. I’ve tried multiple network scans and ope/close FDRS with no change.

Your AB data look rock solid. I don't see any corruption that is typical for the VCX Nano.

I do see those extra characters though you mentioned myself:

      <NODEID>
         706
         <F10A>ML3T-14H106-AGN</F10A>
         <F110>DSML3T-14G647-AL</F110>
         <F111>ML3T-14H107-FF</F111>
         <F113>ML3T-14G647-NA</F113>
         <F120>ML3T-14H102-MDM</F120>
         <F121>NL1T-14H102-SBD</F121>
         <F122>ML3T-14H102-GAP</F122>
         <F124>ML3T-14H103-AAJ</F124>
         <F125>ML3T-14H103-ABP</F125>
         <F127>ML3T-14H103-GAM</F127>
         <F129>ML3T-19G490-BB     ML3T</F129>
         <F12A>ML3T-19G490-BC     ML3T</F12A>
         <F12B>ML3T-19J220-AB     ML3T</F12B>
         <F12C>ML3T-19J220-AC</F12C>
         <F12E>ML3T-19G490-CA</F12E>
         <F16B>ML3T-14H310-BGP</F16B>
         <F17F>1AA160VO</F17F>
         <F188>ML3T-14H102-ABS</F188>
         <F18C>ECUR2110200273</F18C>
         <F1DC>ML3T-14H103-GBF</F1DC>
         <F1E0>PXML3T-14G647-AA</F1E0>
         <F1F3>28741964</F1F3>
      </NODEID>

Not sure myself what those fields are. But I would not stress about it much. Besides that you look to be in good shape

 

[abd79]

Your AB data look rock solid. I don't see any corruption that is typical for the VCX Nano.

I do see those extra characters though you mentioned myself:

      <NODEID>
         706
         <F10A>ML3T-14H106-AGN</F10A>
         <F110>DSML3T-14G647-AL</F110>
         <F111>ML3T-14H107-FF</F111>
         <F113>ML3T-14G647-NA</F113>
         <F120>ML3T-14H102-MDM</F120>
         <F121>NL1T-14H102-SBD</F121>
         <F122>ML3T-14H102-GAP</F122>
         <F124>ML3T-14H103-AAJ</F124>
         <F125>ML3T-14H103-ABP</F125>
         <F127>ML3T-14H103-GAM</F127>
         <F129>ML3T-19G490-BB     ML3T</F129>
         <F12A>ML3T-19G490-BC     ML3T</F12A>
         <F12B>ML3T-19J220-AB     ML3T</F12B>
         <F12C>ML3T-19J220-AC</F12C>
         <F12E>ML3T-19G490-CA</F12E>
         <F16B>ML3T-14H310-BGP</F16B>
         <F17F>1AA160VO</F17F>
         <F188>ML3T-14H102-ABS</F188>
         <F18C>ECUR2110200273</F18C>
         <F1DC>ML3T-14H103-GBF</F1DC>
         <F1E0>PXML3T-14G647-AA</F1E0>
         <F1F3>28741964</F1F3>
      </NODEID>

Not sure myself what those fields are. But I would not stress about it much. Besides that you look to be in good shape

Nice! Thanks for having a look., much appreciated.

 

[iceman77]

Has anyone managed to successfully flash the CCM module via FDRS using the VCX Nano device ?

 

[Thekameleon]

What VCI device have you used ? VCX Nano or Mongoose-Plus ?

VCX Nano

 

[JEB]

I have the same 3 marked as “Other” with the same values as you do. I used a Mongoose to update my modules so not sure what these mean or if they’re corrupted. I’ve tried multiple network scans and ope/close FDRS with no change.

Have you run the J2534 diagnostics? I responded to your earlier post about doing this.

 

[abd79]

Have you run the J2534 diagnostics? I responded to your earlier post about doing this.

Sorry, yes I ran all the diagnostics with the same result.

 

[iceman77]

WARNING - FOR FOLKS USING THE VCX NANO DEVICE

We suspect, the VCX Nano does not perform well with certain devices on FD CAN bus. We are still investigating this but in the mean time please refrain from flashing the CCM module as there is a high chance of bricking it.

If you bricked your module (showing up as Purple in FDRS) you can fix it by PMI-ing the module in FDRS using the Mongoose-Plus cable, or any of the official Fords adapter (VCMII or VCM3).

Folks using the Mongoose-Plus device should be good to go

 

[JEB]

Sorry, yes I ran all the diagnostics with the same result.

Ok. That’s good data. I’m wondering if @tonesto7 ’s widget is doing something weird with these three nodes since @iceman77 isn’t finding any corruptions. As I said, these corruptions look less “corrupt.”

 

[abd79]

Ok. That’s good data. I’m wondering if @tonesto7 ’s widget is doing something weird with these three nodes since @iceman77 isn’t finding any corruptions. As I said, these corruption look less “corrupt.”

@icemann77 saw those values outside of the Ford Pass widget too. He said AB data looks good but isn’t sure what those values are or why they’re the way they are. Some day we’ll figure out when these trucks do a scan and report by themselves to the mother ship but for now I guess we wait.

 

[tonesto7]

Ok. That’s good data. I’m wondering if @tonesto7 ’s widget is doing something weird with these three nodes since @iceman77 isn’t finding any corruptions. As I said, these corruptions look less “corrupt.”

I'm hurt by the thought of that possibility
Seriously though, I'm just using the data pulled from ford. I'm not transforming it anyway.

 

[JEB]

@icemann77 saw those values outside of the Ford Pass widget too. He said AB data looks good but isn’t sure what those values are or why they’re the way they are. Some day we’ll figure out when these trucks do a scan and report by themselves to the mother ship but for now I guess we wait.

Maybe @Bob_Mac can check his module data. I’m curious if he‘s seeing the same thing in these three nodes. Bob?

 

[tonesto7]

Has anyone managed to successfully flash the CCM module via FDRS using the VCX Nano device ?

I know I'm not contributing anything useful but my UCDS adapted flashed it just fine.

Sponsored