Has Anyone Had Ford Dealer Install Walk Away Lock (WAL) by Installing BCM Update Through FDRS? If so, how and was there a cost?

[flypony53]

One thing that might work is if you have an open CSP for a software update on another module you could ask the tech for a favor since they’re already doing FDRS updates. You might get it for free, or you might get charged a small labor charge. I think they even do this with mobile service.

This is the route I took. I had the BCM CSP, but I also was having an issue with my AC running on Auto setting. The blower was not functioning correctly. They used that as a reason to actually update all of the modules in my truck. They said it took a while, but all of them were done. I have walk away lock now, but wish I could disable at the house.

Sponsored

 

[rugedraw]

This is the route I took. I had the BCM CSP, but I also was having an issue with my AC running on Auto setting. The blower was not functioning correctly. They used that as a reason to actually update all of the modules in my truck. They said it took a while, but all of them were done. I have walk away lock now, but wish I could disable at the house.

You can add the toggle to turn WAL on and off with FORScan.

 

[Pioneer74]

You can add the toggle to turn WAL on and off with FORScan.

What software revision on the BCM do you need to make this work? This is mine.

 

[rugedraw]

What software revision on the BCM do you need to make this work? This is mine.

I believe it's AAM, but I'm going off memory that is not my best asset.

 

[flypony53]

You can add the toggle to turn WAL on and off with FORScan.

and you assign that by location?

Sponsored