My new Ford Home Integration System + Battery installation project

[idahospud]

Did you commission the HIS? He is a link to directions for commissioning. https://docs.google.com/presentatio...wHGKRshc/edit?pli=1#slide=id.g1536e0dbd98_0_0
Also, I have included a link sent from Delta about the installation of the system in general. https://sites.google.com/sunrun.com/sop/sops/ev-chargers/ford-ev-charger
Once the installation "bugs" were worked out, my system has been working flawlessly (no solar or battery though).

Sponsored

 

[tearitupsports]

Did you commission the HIS? He is a link to directions for commissioning. https://docs.google.com/presentatio...wHGKRshc/edit?pli=1#slide=id.g1536e0dbd98_0_0
Also, I have included a link sent from Delta about the installation of the system in general. https://sites.google.com/sunrun.com/sop/sops/ev-chargers/ford-ev-charger
Once the installation "bugs" were worked out, my system has been working flawlessly (no solar or battery though).

Thank you for the info.

I have gone through all those documents and paired the truck to the charger a few times. The last time went the best, but still no backup.
Would you be able to confirm a couple items? Is there anywhere in your ford pass app that HIS shows up? My in truck app shows it paired and waiting to start, but there is nothing in either ford pass, or the charge station pro app to indicate it is paired on that side.

Do you use the M-professional app with the inverter? If so can you PM me a snapshot of your summary page? Also confirm the system settings (import/export settings you use). Lastly the power light on your inverter...does it blink once every 5 seconds or is it solid on, when you are on grid power?

Thank you!

 

[idahospud]

Thank you for the info.

I have gone through all those documents and paired the truck to the charger a few times. The last time went the best, but still no backup.
Would you be able to confirm a couple items? Is there anywhere in your ford pass app that HIS shows up? My in truck app shows it paired and waiting to start, but there is nothing in either ford pass, or the charge station pro app to indicate it is paired on that side.

Do you use the M-professional app with the inverter? If so can you PM me a snapshot of your summary page? Also confirm the system settings (import/export settings you use). Lastly the power light on your inverter...does it blink once every 5 seconds or is it solid on, when you are on grid power?

Thank you!

Regarding the Ford Pass app, under the charge station there is a Home Backup Power option. I have attached a screenshot. I did use M-professional. The Power light flashes while on standby, I will check the status of the light during "power-up" next time I test the system. I will save a screenshot of M-professional when i get home.

 

[tearitupsports]

Regarding the Ford Pass app, under the charge station there is a Home Backup Power option. I have attached a screenshot. I did use M-professional. The Power light flashes while on standby, I will check the status of the light during "power-up" next time I test the system. I will save a screenshot of M-professional when i get home.

Thanks. I actually think this might be my issue. I’ve successfully paired the station to the truck but the station doesn’t show enabled like yours and others. Any idea how this gets completed? Is it something Ford has to do?
You can see mine is different.

 

[tearitupsports]

New update. The system finally worked for the first time today. I have not changed anything except I recently received OTA 6.14 as well as ECG-24.2.5.6.2 - Vehicle Communication.
It worked on the first and only try today. I am now going to move my solar over to my backup panel and install the LG battery.

Sponsored