FloridaMan655321
Well-known member
- Thread starter
- #1
I have been lazy at getting 240v installed, mostly because I have been able to get by with 120v. Not ideal, but with the holidays and such I’ve just pushed it off. Obviously now I’m going to change this from the images, but I do have a questions.
I know a continuous charge of 11-12 amps needs a bit more than a 12 amp cable, but I thought this cable would be ok. And for the most part, it has been and I’ve been charging for a couple months without issue. I noticed today the cable is a bit charred inside. Now the problem is I don’t remember looking at this cable before using it, so I can’t be 100% sure I didn’t do something prior to cause this, but I am around 99% sure.
So the main question is, was this mostly caused because I left the truck on the charger for a long period of time? Has anyone else had this issue? I never felt the cable was hot, just slightly warm, but nothing I was concerned about, so maybe if I had a different cable that wasn’t translucent I wouldn’t have noticed? Or maybe I caught this right before a fire was going to start….. Or hopefully I used something else that caused this as I use this cable quite often for other things.
Thank you for any info.
Last edited: