dr1983
Member
no dice, but i have no codes on dash. but i havent installed the steering wheel switch yet.
Sponsored
DIY: Installing ACC (Adaptive Cruise Control) and LKA (Lane Keep Alert) to 2022 F-150 Lightning XLT
bmwhitetx
Well-known member
B177y
Well-known member
- First Name
- Bill
- Joined
- Jul 16, 2024
- Threads
- 3
- Messages
- 150
- Reaction score
- 179
- Location
- Olympic Peninsula WA
- Website
- www.ptcoffee.com
- Vehicles
- 2024 Lightning Pro ER Max Tow
- Occupation
- Coffee Roasting
You have something happening. Your last picture shows the distance stripes in front of the tiny picture of the truck underneath the speedometer.no dice, but i have no codes on dash. but i havent installed the steering wheel switch yet.
If you haven't got the CCM to show up, make sure you follow this section of the instructions:
IMPORTANT: Disconnect FORScan and turn the truck completely off, then back on. Reconnect FORScan BUT do not use the saved profile. Let it rescan for all modules.Connect to IPMA and take a screenshot of the following values
706-19-01 xxxx xxxx xx--
706-19-02 xxxx xxxx xx--
706-19-03 xxxx xxxx xx--
706-19-04 xxxx --
After picture or screenshot, change the following to turn on the CCM:
706-02-02 x**x xxxx xx— (04 to 05)
IMPORTANT: Once again, disconnect FORScan and turn the truck completely off, then back on. Reconnect FORScan BUT do not use the saved profile...
Then continue changing the appropriate values for your truck
B177y
Well-known member
- First Name
- Bill
- Joined
- Jul 16, 2024
- Threads
- 3
- Messages
- 150
- Reaction score
- 179
- Location
- Olympic Peninsula WA
- Website
- www.ptcoffee.com
- Vehicles
- 2024 Lightning Pro ER Max Tow
- Occupation
- Coffee Roasting
Ummm..... You have to have an IPMA module. It controls a lot of systems in the truck.
Sponsored
dr1983
Member
yes i figured but it might have s different name. the closest to the name is APIM
dr1983
Member
mine seems to be on the dash now, and ill be testing it today. It was alot of keyboard warrior sheningans.
B177y
Well-known member
- First Name
- Bill
- Joined
- Jul 16, 2024
- Threads
- 3
- Messages
- 150
- Reaction score
- 179
- Location
- Olympic Peninsula WA
- Website
- www.ptcoffee.com
- Vehicles
- 2024 Lightning Pro ER Max Tow
- Occupation
- Coffee Roasting
The APIM is a different module than the IPMA.
Based on what you have written so far, I would suggest that you stop everything and return all of your Forscan changes back to stock (you did make backups before making any changes, right?).
Find some ForScan tutorials and read/watch those so you have a better understanding of what you are trying to do and how to do it. Then go back to the beginning of this thread and read it all the way through so that you really understand what you are attempting to do.
dr1983
Member
i have done all that deleted, put back to stock, and rescanned
Sponsored
dr1983
Member
ok i did all you said and thanks for the help, after deleting it a few times it popped up
ok i got the horse before the cart this is what i have nowok i did all you said and thanks for the help, after deleting it a few times it popped up
bmwhitetx
Well-known member
Fine to click Ok on that. I get it too when changing the APIM.ok i got the horse before the cart this is what i have now
dr1983
Member
ok i deleted and reinstalled the program on my computer im going to attempt to see if the c-cm comes up. I tried changing values and then doing easy mode and its still not coming up. I’ll keep you posted, this is not easy. I tried driving around town for two days and still bananas
Sponsored
Similar threads
